Kit especial de herramientas para desmontar terminales de cables de coche de todas las marcas

El kit està dissenyat per ser compatible amb la majoria de connectors automotrius estàndard utilitzats en diverses marques i models, incloent-hi terminals plans, rodons i petits pins en vehicles europeus, asiàtics i americans. No obstant això, alguns connectors de disseny propietari o especialitzats poden requerir eines específiques no incloses en aquest set.

El kit inclou cinc eines d'aliatge d'acer amb els diàmetres següents: 1 peça de 1.5 mm, 1 de 1.3 mm, 1 de 1.0 mm i 2 de 0.8 mm. Les de 1.5 mm i 1.3 mm s'utilitzen típicament per a terminals de més mida, com els d'alimentació, mentre que les d'1 mm i 0.8 mm són adequades per a pins petits de senyal o connectors compactes. És recomanable verificar la mida del pin abans de seleccionar l'eina.

Les eines estan dissenyades per treballar amb pins i cables el diàmetre intern del connector dels quals sigui igual o superior a 0.8 mm. Intentar extreure terminals en connectors amb materials especialment durs o pins soldats pot superar-les, danyant les eines o el mateix connector. No es recomana aplicar-les amb eines d'impacte o força excessiva.

A diferència dels extractors universals o dels tornavisos fins, aquest kit proporciona un ajust precís al diàmetre de cada pin, minimitzant el risc de danyar el connector, doblegar terminals o tallar cables. A més, l'aliatge d'acer i el disseny ergonòmic aporten més control i seguretat en l'extracció, sobretot en espais reduïts on una eina improvisada podria no funcionar correctament.

The kit is designed to be compatible with most standard automotive connectors used across various makes and models, including flat terminals, round terminals and small pins in European, Asian and American vehicles. However, some proprietary or specialist connectors may require specific tools not included in this set.

The kit includes five steel alloy tools with the following diameters: 1 piece of 1.5 mm, 1 of 1.3 mm, 1 of 1.0 mm and 2 of 0.8 mm. The 1.5 mm and 1.3 mm tools are typically used for larger terminals, such as power terminals, while the 1.0 mm and 0.8 mm tools are suitable for small signal pins or compact connectors. It is advisable to check the pin size before selecting the tool.

The tools are designed to work with pins and cables whose connector internal diameter is 0.8 mm or greater. Attempting to remove terminals from connectors made of especially hard materials or soldered pins may exceed their limits, damaging the tools or the connector itself. They are not recommended for use with impact tools or excessive force.

Unlike universal extractors or thin screwdrivers, this kit provides a precise fit to each pin diameter, minimising the risk of damaging the connector, bending terminals or cutting wires. In addition, the steel alloy and ergonomic design provide greater control and safety during removal, especially in tight spaces where an improvised tool may not work properly.

The kit is designed to be compatible with most standard automotive connectors used across various makes and models, including flat terminals, round terminals and small pins in European, Asian and American vehicles. However, some proprietary or specialised connectors may require specific tools not included in this set.

The kit includes five steel alloy tools with the following diameters: 1 piece of 1.5 mm, 1 of 1.3 mm, 1 of 1.0 mm and 2 of 0.8 mm. The 1.5 mm and 1.3 mm tools are typically used for larger terminals, such as power terminals, while the 1.0 mm and 0.8 mm tools are suitable for small signal pins or compact connectors. It is advisable to check the pin size before selecting the tool.