Adaptador de corriente para Nintendo DS, GBA y GBA SP compatible y seguro

L’adaptador proporciona una sortida de 5,2 V DC a 450 mA, habitual per a aquests models de consola. L’entrada sol ser de 100-240 V AC, 50/60 Hz, cosa que permet el seu ús internacional. L’endoll és de tipus europeu de dues clavilles (tipus C); per a altres estàndards pot caldre un adaptador.

La carcassa està fabricada en policarbonat i ABS, materials plàstics resistents a l’impacte i a la calor. El cable sol ser de coure recobert amb PVC flexible. Amb un ús normal (1-2 cicles de càrrega diaris), la vida útil típica oscil·la entre 2 i 5 anys segons el tracte i les condicions ambientals.

Aquest tipus d’adaptador disposa de protecció estàndard contra sobrecàrrega i curtcircuit. Tot i que no compta amb certificacions d’alta gamma (com CE o UL) garantides en totes les versions, el risc de sobreescalfament és baix en condicions normals d’ús, però cal evitar exposar-lo a humitat o a un ús prolongat fora d’especificacions.

Es recomana connectar primer l’adaptador a la consola abans d’endollar-lo al corrent, i desconnectar-lo en ordre invers per evitar pics de voltatge. Emmagatzema l’adaptador enrotllant el cable suaument, sense estirades, i allunyant-lo de fonts de calor o humitat per maximitzar-ne la vida útil.

The adapter provides an output of 5.2 V DC at 450 mA, which is common for these console models. The input is usually 100-240 V AC, 50/60 Hz, allowing international use. The plug is a European two-pin type (Type C); for other standards, an adapter may be required.

The housing is made from polycarbonate and ABS, impact- and heat-resistant plastics. The cable is usually copper with flexible PVC coating. Under normal use (1-2 charging cycles per day), the typical service life ranges from 2 to 5 years depending on handling and environmental conditions.

This type of adapter has standard overload and short-circuit protection. Although it does not have guaranteed high-end certifications (such as CE or UL) in all versions, the risk of overheating is low under normal use, but it should not be exposed to moisture or used for prolonged periods outside specifications.

It is recommended to connect the adapter to the console first before plugging it into the mains, and to disconnect it in the reverse order to avoid voltage spikes. Store the adapter by gently coiling the cable, without pulling, and keep it away from heat or moisture to maximise its service life.

The adapter provides a 5.2 V DC output at 450 mA, which is common for these console models. The input is usually 100-240 V AC, 50/60 Hz, allowing international use. The plug is a European two-pin type (Type C); an adapter may be required for other standards.

The housing is made from polycarbonate and ABS, impact-resistant and heat-resistant plastics. The cable is usually copper with flexible PVC coating. Under normal use (1-2 charging cycles per day), typical service life ranges from 2 to 5 years depending on handling and environmental conditions.