Caja de Plástico para proyectos 170x130x60mm resistente y hermética
Marca: satkit
IVA incluido (Sin IVA: 5,00€)
Caja de Plástico para proyectos 170x130x60mm
Esta caja de plástico está diseñada especialmente para proyectos electrónicos y almacenamiento seguro de aparatos sensibles. Fabricada en poliestireno resistente a golpes, ofrece una protección robusta contra impactos y condiciones ambientales adversas.
Características principales:
- Material: plástico moldeado y poliestireno resistente a golpes.
- Dimensiones exteriores: 170x130x60mm.
- Construcción en cuatro piezas para un montaje sencillo y seguro.
- Cierre hermético que evita la entrada de humedad y polvo, ideal para proteger componentes electrónicos.
- Cierre con tornillos que garantiza una fijación segura y duradera.
Usos típicos:
- Almacenamiento y protección de aparatos electrónicos sensibles.
- Carcasa para fuentes de energía eléctrica y otros dispositivos electrónicos.
- Proyectos de electrónica que requieren un contenedor resistente y hermético.
Compatibilidad: Esta caja es compatible con una amplia variedad de dispositivos electrónicos y proyectos que requieran protección contra golpes, polvo y humedad.
Gracias a su diseño robusto y cierre hermético, esta caja es la solución perfecta para mantener tus componentes electrónicos seguros y organizados.
- Fabricada en poliestireno resistente a golpes para máxima protección.
- Dimensiones exteriores de 170x130x60mm, ideal para proyectos electrónicos.
- Cierre hermético que evita la entrada de humedad y polvo.
- Consta de cuatro piezas para un montaje sencillo y seguro.
- Cierre con tornillos para una fijación firme y duradera.
Preguntas y respuestas de clientes
What level of protection against dust and moisture does this plastic case provide, and is it suitable for outdoor use?
The case has a sealed closure with screws, which helps protect against dust and moisture. However, no specific IP rating is stated, so it is not recommended for outdoor use without additional information about its seal and water resistance.
What are the manufacturing materials of the case and what advantages does polystyrene offer over other plastics?
The case is made of impact-resistant polystyrene. Polystyrene offers good rigidity, resistance to light impacts and low weight, although compared with ABS or polycarbonate, it has lower thermal and chemical resistance.
What type of electronic devices can be installed and what is the maximum load supported by the case?
It can house small to medium-sized electronic devices, such as circuit boards, transformers and power supplies. The maximum supported load depends on the type of mounting and weight distribution, but for standard use loads above 1-2 kg are not recommended in stationary use.
What usable internal dimensions does the case have and how much space is available considering the wall thickness?
The external dimensions are 170 x 130 x 60 mm. The typical wall thickness of polystyrene cases of this type is 2-3 mm, so the usable internal space is estimated at approximately 166 x 126 x 56 mm.
Can the case be drilled or modified without compromising its seal or structural strength?
It is possible to drill the case to install connectors or ventilation, but each hole may reduce the seal and affect structural strength. The use of cable glands or suitable seals is recommended if openings are required.
What level of protection against dust and moisture does this plastic box provide and is it suitable for outdoor use?
The box has a sealed screw closure, which helps protect against dust and moisture. However, no specific IP rating is stated, so it is not recommended for outdoor use without additional information about its seal and water resistance.
What are the manufacturing materials of the box and what advantages does polystyrene offer over other plastics?
The box is made of impact-resistant polystyrene. Polystyrene offers good rigidity, resistance to light impacts and low weight, although compared with ABS or polycarbonate, it has lower thermal and chemical resistance.
What type of electronic devices can be installed and what is the maximum load supported by the box?
It can house small to medium-sized electronic devices, such as circuit boards, transformers and power supplies. The maximum supported load depends on the type of mounting and weight distribution, but for standard use loads above 1-2 kg are not recommended in stationary use.
What usable internal dimensions does the box have and what space is available taking wall thickness into account?
The external dimensions are 170 x 130 x 60 mm. The typical wall thickness of polystyrene boxes of this type is 2-3 mm, so the usable internal space is estimated at approximately 166 x 126 x 56 mm.
Can the box be drilled or modified without compromising its sealing or structural strength?
It is possible to drill the box to install connectors or ventilation, but each hole may reduce sealing and affect structural strength. The use of cable glands or suitable seals is recommended if openings are required.
Escribe una opinión de cliente
Los clientes que compraron este artículo también compraron
Maleta 128 Cajitas Componentes SMD Modular con Tapa para Organizar Electrónica
Tus artículos vistos recientemente
Sensor puerta ventana inalámbrico SONOFF DW2 RF para alarma de seguridad doméstica
RS232 TTL Convertidor Cable Kit para conexiones seriales fiables y versátiles
Control remoto RF 433MHz Sonoff con 4 botones para dispositivos smart home
