Cajita componentes SMD modular con tapa 75mm x 60mm Wentai

El sistema modular permet unir diverses capsetes de diferents mides segons la necessitat, cosa que facilita la personalització de l’emmagatzematge. Això és especialment avantatjós davant d’organitzadors fixos, ja que pots ampliar, segmentar o reorganitzar espais a mesura que augmenten o canvien els teus components. El mecanisme d’obertura individual de cada tapa minimitza accidents i facilita l’accés selectiu.

La capsa està fabricada en plàstic dur (polipropilè) transparent per a les tapes i base de color, tots dos materials resistents a impactes moderats i a la majoria de solvents no agressius habitualment utilitzats en laboratoris electrònics. En condicions normals (ús en laboratori/makerspace), s’espera una durabilitat superior a 3 anys sense deformacions ni pèrdua de funcionalitat en els ressorts de les tapes.

Les dimensions externes de cada capsa són 75 mm (ample) x 60 mm (llarg) x 22 mm (alt). Internament, cada compartiment pot variar lleugerament, però l’espai útil sol ser d’uns 72 mm x 57 mm x 20 mm a causa del gruix del material. La capacitat està pensada per a objectes petits com resistències, xips SMD, cargols, etc. Es recomana no emmagatzemar peces de més de 20 mm per evitar que pressionin massa la tapa.

El sistema és compatible i permet unir capses de diferents mides. L’única limitació observada és que, en barrejar capses d’alçades diferents, pot haver-hi una petita inestabilitat lateral si no s’ensamblen correctament, tot i que això no afecta la funció d’emmagatzematge. Es recomana apilar primer les capses de la mateixa alçada per a més estabilitat.

The modular system allows several boxes of different sizes to be joined as needed, making storage customisation easier. This is especially advantageous compared with fixed organisers, as you can expand, segment or rearrange spaces as your components grow or change. The individual lid-opening mechanism reduces accidents and makes selective access easier.

The box is made from hard plastic (polypropylene), with transparent lids and a coloured base, both materials being resistant to moderate impacts and to most non-aggressive solvents commonly used in electronics labs. Under normal conditions (lab/makerspace use), durability of more than 3 years is expected without deformation or loss of functionality in the lid springs.

The external dimensions of each box are 75 mm (width) x 60 mm (length) x 22 mm (height). Internally, each compartment may vary slightly, but the usable space is usually around 72 mm x 57 mm x 20 mm due to the material thickness. It is intended for small items such as resistors, SMD chips, screws, etc. It is recommended not to store parts larger than 20 mm to avoid excessive pressure on the lid.

The system is compatible and allows boxes of different sizes to be joined. The only limitation observed is that mixing boxes of different heights may cause slight lateral instability if they are not assembled correctly, although this does not affect storage function. It is recommended to stack boxes of the same height first for greater stability.

The modular system allows several boxes of different sizes to be joined as needed, making storage customisation easier. This is especially advantageous compared with fixed organisers, as you can expand, segment or reorganise spaces as your components grow or change. The individual opening mechanism for each lid helps minimise accidents and makes selective access easier.

The box is made from hard plastic (polypropylene), with transparent lids and a coloured base, both materials being resistant to moderate impacts and most non-aggressive solvents commonly used in electronics labs. Under normal conditions (lab/makerspace use), durability of more than 3 years is expected without deformation or loss of functionality in the lid springs.