TTP229 módulo interruptor táctil capacitivo de 16 canales para Arduino

El mòdul fa 65 mm x 50 mm i normalment pesa prop de 20 g. En la compra habitual només s’inclou la placa assemblada; no sol portar cables ni suports, per la qual cosa cal preveure aquests elements addicionals segons el muntatge.

Es recomana muntar el TTP229 sobre superfícies no metàl·liques i amb una separació mínima d’almenys 2 mm respecte a objectes conductors. És crucial evitar cables llargs sense apantallar i utilitzar GND comú. En entorns industrials, pot ser necessari encapsular-lo o afegir filtres.

La sensibilitat del mòdul pot veure’s alterada per la humitat, l’alta estàtica o la proximitat d’objectes conductors. Per solucionar-ho, mantingueu seca la superfície, allunyeu el mòdul de fonts de RF i ajusteu la sensibilitat per maquinari o programari si el disseny del sistema ho permet.

The module measures 65 mm x 50 mm and typically weighs around 20 g. In a standard purchase, only the assembled board is included; cables or brackets are not usually supplied, so you should allow for these extras depending on the installation.

It is recommended to mount the TTP229 on non-metallic surfaces and keep it at least 2 mm away from conductive objects. It is crucial to avoid long unshielded cables and to use a common GND. In industrial environments, encapsulation or additional filters may be necessary.

The module’s sensitivity can be affected by moisture, high static electricity or proximity to conductive objects. To resolve this, keep the surface dry, move the module away from RF sources, and adjust the sensitivity in hardware or software if the system design allows it.

The module measures 65 mm x 50 mm and typically weighs around 20 g. In a standard purchase, only the assembled board is included; cables or brackets are not usually supplied, so these should be provided separately depending on the installation.

It is recommended to mount the TTP229 on non-metallic surfaces and keep at least 2 mm clearance from conductive objects. It is crucial to avoid long unshielded cables and to use a common GND. In industrial environments, encapsulation or additional filtering may be necessary.

The module’s sensitivity can be affected by humidity, high static charge or proximity to conductive objects. To resolve this, keep the surface dry, move the module away from RF sources, and adjust sensitivity in hardware or software if the system design allows it.

Modulen mäter 65 mm x 50 mm och väger vanligtvis cirka 20 g. Vid normalt köp ingår endast det monterade kortet; kablar eller fästen medföljer vanligtvis inte, så dessa måste ordnas separat beroende på installationen.