Carro herramientas taller profesional 3 pisos con ruedas de montaje TSX TOOL

No es disposa d’una dada exacta oficial, però models similars d’acer i dimensions (700 x 350 x 760 mm) solen suportar entre 30 i 40 kg per prestatge de manera uniforme, per a un total aproximat de 90 a 120 kg. Es recomana no superar aquestes xifres sense especificacions certificades.

Per al muntatge típic d’aquest carro es requereixen eines manuals bàsiques, com ara tornavís i clau fixa o de vaso. L’assemblatge estàndard el pot fer una sola persona en uns 20-30 minuts, seguint instruccions convencionals d’assemblatge amb cargols.

Comparat amb models de plàstic reforçat, el carro d’acer suporta càrregues més altes i presenta millor resistència als cops i al foc, però pot ser lleugerament més pesat i menys resistent a alguns productes químics. El plàstic té avantatge en portabilitat, però és menys robust davant càrregues pesades i danys mecànics.

There is no exact official figure available, but similar steel models of this size (700 x 350 x 760 mm) typically support between 30 and 40 kg per shelf evenly distributed, for an approximate total of 90 to 120 kg. It is recommended not to exceed these figures without certified specifications.

For typical assembly of this trolley, basic hand tools are required, such as a screwdriver and an open-ended or socket spanner. Standard assembly can be completed by one person in around 20–30 minutes, following conventional screw-together instructions.

Compared with reinforced plastic models, the steel trolley supports heavier loads and offers better resistance to impacts and fire, but it may be slightly heavier and less resistant to some chemicals. Plastic has the advantage of portability, but it is less robust under heavy loads and mechanical damage.

No exact official figure is available, but similar steel models of this size (700 x 350 x 760 mm) typically support between 30 and 40 kg per shelf when evenly distributed, for a total of approximately 90 to 120 kg. It is recommended not to exceed these figures without certified specifications.

For typical assembly of this trolley, basic hand tools are required, such as a screwdriver and an open-ended or socket spanner. Standard assembly can be completed by one person in around 20–30 minutes, following conventional screw-fix assembly instructions.

Compared with reinforced plastic models, the steel trolley supports heavier loads and offers better resistance to impacts and fire, but it may be slightly heavier and less resistant to certain chemicals. Plastic has the advantage in portability, but it is less robust under heavy loads and mechanical damage.

Det finns ingen exakt officiell uppgift, men liknande modeller i stål med måtten 700 x 350 x 760 mm brukar klara mellan 30 och 40 kg per hylla jämnt fördelat, för en total uppskattning på cirka 90 till 120 kg. Det rekommenderas att inte överskrida dessa nivåer utan certifierade specifikationer.