Kit restauracion faros coche con polimero liquido 800ml - TSX TOOL

The kit contains an 800 ml bottle of liquid polymer, sandpaper in different grits, and basic accessories for headlight application. The approximate weight of the kit is 1 to 1.2 kg, and the bottle measures around 22 cm high by 9 cm in diameter. Contents may vary by manufacturer, but it typically includes enough materials to restore 8 to 12 pairs of headlights.

It is not necessary to remove the headlights; the process is designed to be carried out with the headlamps installed on the vehicle. However, it is recommended to protect the surrounding areas with tape to avoid damage to the bodywork during sanding and polymer application.

The liquid polymer may emit slight fumes and can be irritating if it comes into contact with the skin or eyes. It is recommended to use nitrile gloves, safety goggles, and work in a well-ventilated area. The product usually complies with basic chemical safety regulations for domestic use, but it is important to consult the safety data sheet included in the kit.

The kit contains an 800 ml bottle of liquid polymer, sandpapers of different grits, and basic accessories for headlight application. The kit weighs approximately 1 to 1.2 kg, and the bottle measures around 22 cm high by 9 cm in diameter. Contents may vary depending on the manufacturer, but it typically includes enough materials to restore 8 to 12 pairs of headlights.

It is not necessary to remove the headlights; the process is designed to be carried out with the lights installed on the vehicle. However, it is recommended to protect the surrounding areas with tape to avoid damage to the bodywork during sanding and polymer application.

The liquid polymer may emit slight fumes and can be irritating if it comes into contact with the skin or eyes. It is recommended to use nitrile gloves, safety goggles, and work in a well-ventilated area. The product usually complies with basic chemical safety regulations for domestic use, but it is important to consult the safety data sheet included in the kit.

Kitet innehåller en flaska med 800 ml flytande polymer, slippapper med olika kornstorlekar och grundläggande tillbehör för applicering på strålkastare. Kitet väger cirka 1 till 1,2 kg och flaskan är ungefär 22 cm hög och 9 cm i diameter. Innehållet kan variera beroende på tillverkare, men innehåller vanligtvis material nog för att restaurera 8 till 12 par strålkastare.

Det är inte nödvändigt att demontera strålkastarna; processen är utformad för att utföras med optiken monterad på fordonet. Det rekommenderas dock att skydda omgivande ytor med tejp för att undvika skador på karossen under slipning och applicering av polymeren.

Den flytande polymeren kan avge svaga ångor och kan vara irriterande vid kontakt med hud eller ögon. Det rekommenderas att använda nitrilhandskar, skyddsglasögon och arbeta i ett ventilerat område. Produkten uppfyller vanligtvis grundläggande kemiska säkerhetskrav för hushållsbruk, men det är viktigt att läsa säkerhetsdatabladet som ingår i kitet.

Komplet vsebuje 800 ml steklenico tekočega polimera, brusne papirje različnih granulacij in osnovni pribor za nanos na žaromete. Približna teža kompleta je 1 do 1,2 kg, steklenica pa meri približno 22 cm v višino in 9 cm v premer. Vsebina se lahko razlikuje glede na proizvajalca, vendar običajno vključuje dovolj materiala za obnovo 8 do 12 parov žarometov.