Adaptador corriente HP 65W 18.5V 3.5A PPP009L compatible para portátiles

L'adaptador té un diàmetre de connector intern d'1.7 mm, extern de 4.8 mm, i generalment mesura al voltant de 120 mm × 50 mm × 30 mm. Està fabricat en plàstic ABS d'alta resistència i components electrònics estàndard. El contingut típic de la caixa és l'adaptador, cable de corrent desmuntable i manual bàsic. No s'hi inclouen accessoris addicionals.

No necessita cap configuració especial; simplement cal connectar-lo al corrent i al portàtil compatible. El nivell de soroll acústic sol ser inferior a 25 dB sota càrrega normal. Pel que fa a les interferències electromagnètiques, compleix les normatives CE i FCC, de manera que la seva emissió és mínima si l'equip està en bon estat.

L'adaptador de 65 W està optimitzat per a portàtils que requereixen fins a 65 W; fer servir un de 90 W no millora la càrrega ni el rendiment, però tampoc sol danyar la bateria si el voltatge és correcte. Tanmateix, l'excés de potència nominal pot implicar una mida més gran i un lleu augment del consum en standby. Per a models recomanats, l'eficiència energètica és similar si totes dues fonts són de qualitat equivalent.

The adapter has an inner connector diameter of 1.7 mm and an outer diameter of 4.8 mm, and generally measures around 120 mm × 50 mm × 30 mm. It is made from high-strength ABS plastic and standard electronic components. The typical box contents are the adapter, detachable power cable and basic manual. No additional accessories are included.

No special configuration is needed; simply connect it to the mains and to the compatible laptop. The acoustic noise level is usually below 25 dB under normal load. As for electromagnetic interference, it complies with CE and FCC regulations, so emissions are minimal if the unit is in good condition.

The 65 W adapter is optimised for laptops that require up to 65 W; using a 90 W one does not improve charging or performance, but it does not usually damage the battery if the voltage is correct. However, the higher rated power may mean a larger size and a slight increase in standby consumption. For recommended models, energy efficiency is similar if both power supplies are of equivalent quality.

The adapter has an inner connector diameter of 1.7 mm and an outer diameter of 4.8 mm, and generally measures around 120 mm × 50 mm × 30 mm. It is made from high-strength ABS plastic and standard electronic components. The typical box contents are the adapter, detachable power cable and basic manual. No additional accessories are included.

No special configuration is needed; simply connect it to the mains and to the compatible laptop. The acoustic noise level is usually below 25 dB under normal load. As for electromagnetic interference, it complies with CE and FCC regulations, so emissions are minimal if the unit is in good condition.

The 65 W adapter is optimised for laptops that require up to 65 W; using a 90 W adapter does not improve charging or performance, but it usually will not damage the battery if the voltage is correct. However, the higher power rating may mean a larger size and a slight increase in standby consumption. For recommended models, energy efficiency is similar if both power supplies are of equivalent quality.

Adaptern har en innerdiameter på 1.7 mm och ytterdiameter på 4.8 mm, och mäter vanligtvis omkring 120 mm × 50 mm × 30 mm. Den är tillverkad av högslitstark ABS-plast och standardelektroniska komponenter. Det typiska innehållet i kartongen är adaptern, en löstagbar strömkabel och en enkel manual. Inga extra tillbehör ingår.