Molde reparación y encolado LCD Samsung Galaxy S5 para pegado profesional

El motlle habitualment està fabricat en alumini o un aliatge resistent i recobert per resistir l'exposició a adhesius químics com LOCA, evitant deformacions i facilitant la neteja, cosa que garanteix múltiples usos sense pèrdua de precisió dimensional.

Es recomana netejar el motlle amb alcohol isopropílic abans de cada ús per evitar restes d'adhesiu que puguin afectar el centrat. No requereix cap pretractament addicional, però s'ha de manipular sobre una superfície neta i anivellada per garantir un ajust correcte.

És important eliminar immediatament qualsevol residu de LOCA amb un solvent adequat (alcohol isopropílic o acetona) i assecar completament el motlle. Cal evitar l'ús d'utensilis abrasius per no danyar les superfícies de contacte.

The mould is usually made from aluminium or a durable alloy and coated to withstand exposure to chemical adhesives such as LOCA, preventing deformation and making cleaning easier, which ensures multiple uses without loss of dimensional accuracy.

It is recommended to clean the mould with isopropyl alcohol before each use to remove any adhesive residue that could affect centring. No additional pre-treatment is required, but it should be handled on a clean, level surface to ensure a proper fit.

It is important to remove any LOCA residue immediately with a suitable solvent (isopropyl alcohol or acetone) and dry the mould completely. Abrasive tools should be avoided so as not to damage the contact surfaces.

The mould is usually made from aluminium or a durable alloy and coated to withstand exposure to chemical adhesives such as LOCA, preventing deformation and making cleaning easier, which ensures multiple uses without loss of dimensional accuracy.

It is recommended to clean the mould with isopropyl alcohol before each use to remove any adhesive residue that could affect centring. No additional pre-treatment is required, but it should be handled on a clean, level surface to ensure correct fitting.

It is important to remove any LOCA residue immediately with a suitable solvent (isopropyl alcohol or acetone) and dry the mould completely. Abrasive tools should be avoided so as not to damage the contact surfaces.

Formen är vanligtvis tillverkad av aluminium eller en tålig legering och belagd för att motstå exponering för kemiska lim som LOCA, vilket förhindrar deformation och underlättar rengöring. Detta garanterar många användningar utan förlust av dimensionsprecision.