Molde reparación y encolado LCD para iPhone 6s Plus 5.5"

El motlle garanteix l’alineació precisa de la pantalla i el vidre, evitant desplaçaments durant l’encolat amb LOCA glue. Això redueix errors en la col·locació i minimitza el risc de bombolles o males unions, millorant la qualitat del resultat respecte a una manipulació manual sense eines específiques.

El motlle normalment està fabricat en alumini mecanitzat, cosa que li dona bona resistència al desgast i estabilitat dimensional. Les seves mides aproximades són 165 mm x 85 mm x 12 mm, dissenyades específicament per a pantalles d’iPhone 6s Plus de 5,5 polzades. El pes ronda els 200 g.

Es recomana treballar en una zona ben ventilada i fer servir guants de nitril per manipular LOCA glue, ja que pot causar irritació cutània. En fer servir el motlle, assegureu-vos que les peces quedin netes i seques per evitar reaccions indesitjades. No cal connectivitat elèctrica, per tant el risc elèctric és nul.

El motlle, en ser d’alumini, té una durabilitat alta si s’evita l’ús d’eines abrasives i es neteja després de cada ús per retirar restes d’adhesiu. No presenta parts mòbils, però es recomana una revisió regular de la superfície de contacte per descartar deformacions o residus que afectin futures reparacions.

The mould ensures precise alignment of the screen and glass, preventing movement during bonding with LOCA glue. This reduces placement errors and minimises the risk of bubbles or poor bonding, improving the quality of the result compared with manual handling without specific tools.

The mould is usually made from machined aluminium, which gives it good wear resistance and dimensional stability. Its approximate measurements are 165 mm x 85 mm x 12 mm, designed specifically for 5.5-inch iPhone 6s Plus screens. The weight is around 200 g.

It is recommended to work in a well-ventilated area and wear nitrile gloves when handling LOCA glue, as it may cause skin irritation. When using the mould, make sure the parts are clean and dry to avoid unwanted reactions. No electrical connection is required, so there is no electrical risk.

As it is made from aluminium, the mould is highly durable if abrasive tools are avoided and it is cleaned after each use to remove adhesive residue. It has no moving parts, but regular inspection of the contact surface is recommended to rule out deformation or residue that could affect future repairs.

The mould ensures precise alignment of the screen and glass, preventing movement during bonding with LOCA glue. This reduces placement errors and minimises the risk of bubbles or poor bonding, improving the quality of the result compared with manual handling without specific tools.

The mould is usually made from machined aluminium, which gives it good wear resistance and dimensional stability. Its approximate measurements are 165 mm x 85 mm x 12 mm, designed specifically for 5.5-inch iPhone 6s Plus screens. The weight is around 200 g.