Set 21pc Extractor de Rótulas con Adaptadores para Automoción TSX TOOL

El set inclou adaptadors i maneguets de diferents mides: obertura de forquilla de pressió de 152 mm, adaptadors i maneguets amb diàmetres exteriors entre 1-7/16" (36,5 mm) i 2-1/2" (63,5 mm), cobrint la majoria de ròtules superiors i inferiors de vehicles utilitaris, camionetes i furgonetes. Per a vehicles molt específics o comercials pesants poden caldre adaptadors addicionals.

No és necessari; el set està dissenyat per a operació manual mitjançant el seu cargol de pressió i bastidor en 'C'. Tanmateix, es recomana l'ús d'una clau d'impacte o barra de força per facilitar l'operació en ròtules especialment ajustades o corroïdes.

Amb acer forjat tractat tèrmicament, aquests extractors suporten un ús intensiu diari, tot i que la vida útil depèn de la lubricació adequada del cargol de pressió i d'evitar superar la càrrega màxima recomanada (consulteu el manual del set). Es suggereix neteja i greixatge després de cada ús. El desgast prematur sol produir-se per un ús inapropiat.

El set generalment compleix estàndards de seguretat d'eines manuals automotrius, com DIN o ISO segons el fabricant, tot i que no s'esmenta cap certificació particular a la descripció. És recomanable verificar-ho amb el proveïdor si es requereix homologació específica per a tallers certificats.

The set includes adapters and sleeves in various sizes: a pressure fork opening of 152 mm, and adapters and sleeves with outer diameters from 1-7/16" (36.5 mm) to 2-1/2" (63.5 mm), covering most upper and lower ball joints on SUVs, pick-ups and vans. For very specific vehicles or heavy commercial vehicles, additional adapters may be required.

No; the set is designed for manual operation using its pressure screw and C-frame. However, the use of an impact wrench or breaker bar is recommended to make operation easier on particularly tight or corroded ball joints.

With heat-treated forged steel, these pullers can withstand intensive daily use, although service life depends on proper lubrication of the pressure screw and avoiding exceeding the recommended maximum load (see the set manual). Cleaning and greasing after each use is advised. Premature wear usually occurs through improper use.

The set generally complies with automotive hand tool safety standards, such as DIN or ISO depending on the manufacturer, although no particular certification is mentioned in the description. It is advisable to check with the supplier if specific approval is required for certified workshops.

The set includes adapters and sleeves in various sizes: a pressure fork opening of 152 mm, and adapters and sleeves with outer diameters from 1-7/16" (36.5 mm) to 2-1/2" (63.5 mm), covering most upper and lower ball joints on SUVs, pick-ups and vans. For very specific vehicles or heavy commercial vehicles, additional adapters may be required.

No; the set is designed for manual operation using its pressure screw and C-frame. However, the use of an impact wrench or breaker bar is recommended to make operation easier on particularly tight or corroded ball joints.