Mando compatible Nintendo NES - Controlador para consola NES y Famicom

El comandament mesura aproximadament 122 mm x 53 mm x 18 mm i pesa al voltant de 90 g. Està fabricat principalment en ABS, un plàstic resistent utilitzat habitualment en controls retro.

No requereix instal·lació especial; el gamepad funciona de seguida en connectar-lo al port corresponent de la consola NES o Famicom compatible. No necessita programari, drivers ni configuració.

Aquest controlador replica el disseny físic, però els materials i els controls interns poden diferir de l’original en robustesa i precisió. Normalment no arriba a la mateixa vida útil ni al mateix tacte que un gamepad original de Nintendo, tot i que és suficient per a un ús regular no intensiu.

The controller measures approximately 122 mm x 53 mm x 18 mm and weighs around 90 g. It is mainly made from ABS, a durable plastic commonly used in retro controllers.

No special installation is required; the gamepad works immediately when connected to the corresponding port on a compatible NES or Famicom console. No software, drivers or configuration are needed.

This controller replicates the physical design, but the materials and internal controls may differ from the original in robustness and precision. It usually does not achieve the same service life or feel as an original Nintendo gamepad, although it is sufficient for regular, non-intensive use.

The controller measures approximately 122 mm x 53 mm x 18 mm and weighs around 90 g. It is mainly made from ABS, a durable plastic commonly used in retro controllers.

No special installation is required; the gamepad works immediately when connected to the relevant port on a compatible NES or Famicom console. No software, drivers or configuration are needed.

This controller replicates the physical design, but the materials and internal controls may differ from the original in robustness and precision. It usually does not match the lifespan or feel of an original Nintendo gamepad, although it is sufficient for regular, non-intensive use.

Handkontrollen mäter cirka 122 mm x 53 mm x 18 mm och väger omkring 90 g. Den är huvudsakligen tillverkad av ABS, en tålig plast som ofta används i retrokontroller.