Lente PVR802 nueva para Sony PSTwo - Repuesto compatible y funcional

Les dimensions típiques de la lent Pvr802 són aproximadament 40 mm x 35 mm x 8 mm i el seu pes ronda els 9-12 grams. Aquestes mesures poden variar mínimament a causa del muntatge, però són estàndard per a recanvis originals de PSTwo.

És fonamental retirar el pont de protecció antiestàtica abans de connectar la lent i evitar la manipulació de l'òptica per no contaminar-la. A més, el maneig s'ha de fer amb una polsera antiestàtica per reduir riscos ESD. Errors comuns com aplicar un voltatge inadequat o flexionar el cable poden danyar permanentment el làser.

La Pvr802 és equivalent a les lents originals Sony en termes d'especificacions òptiques i mecàniques si es tracta d'un recanvi autèntic nou. Tanmateix, la durabilitat final depèn en gran mesura de la instal·lació correcta i de la qualitat de fabricació del lot específic, ja que al mercat hi ha variacions entre fabricants.

The typical dimensions of the Pvr802 lens are approximately 40 mm x 35 mm x 8 mm and its weight is around 9-12 grams. These measurements may vary slightly due to assembly, but they are standard for original PSTwo replacement parts.

It is essential to remove the anti-static protection bridge before connecting the lens and to avoid handling the optics so as not to contaminate it. In addition, handling should be done with an anti-static wrist strap to reduce ESD risks. Common mistakes such as applying incorrect voltage or bending the cable can permanently damage the laser.

The Pvr802 is equivalent to original Sony lenses in terms of optical and mechanical specifications if it is a genuine new replacement part. However, final durability depends greatly on correct installation and the manufacturing quality of the specific batch, as there are variations between manufacturers on the market.

The typical dimensions of the Pvr802 lens are approximately 40 mm x 35 mm x 8 mm and its weight is around 9-12 grams. These measurements may vary slightly due to assembly, but they are standard for original PSTwo replacement parts.

It is essential to remove the anti-static protection bridge before connecting the lens and to avoid handling the optics so as not to contaminate it. In addition, handling should be done with an anti-static wrist strap to reduce ESD risks. Common mistakes such as applying the wrong voltage or bending the cable can permanently damage the laser.

The Pvr802 is equivalent to original Sony lenses in terms of optical and mechanical specifications if it is a genuine new replacement part. However, final durability depends greatly on correct installation and the manufacturing quality of the specific batch, as there are variations between manufacturers on the market.

De typiska måtten för Pvr802-linsen är cirka 40 mm x 35 mm x 8 mm och vikten ligger runt 9–12 gram. Dessa mått kan variera något beroende på montering, men är standard för originalreservdelar till PSTwo.