Kit conectores XT60 XT90 EC3 EC5 para RC con adaptador macho y hembra

Els connectors XT60 suporten fins a 60 A continus, XT90 fins a 90 A, EC3 fins a 60 A, EC5 fins a 120 A, i el connector T generalment admet fins a 50 A, tots dins d’un rang de tensió típic de fins a 500 V DC. És important respectar aquestes xifres per evitar sobreescalfaments i possibles fallades elèctriques, considerant també els límits del cable subministrat (14 AWG, aproximadament 30 A continus).

Aquests connectors compleixen amb normes estàndard de seguretat elèctrica per a modelisme RC, i és fonamental assegurar-se d’un crimpat o soldadura correctes i aïllar tots els terminals amb tub termoretràctil inclòs. Comproveu sempre la polaritat abans de connectar per evitar danys als equips. No connecteu ni desconnecteu sota càrrega per evitar espurnes i deteriorament dels contactes.

El kit inclou connectors mascle i femella de cada tipus, cable de silicona i tub termoretràctil suficient per muntar diversos cables o adaptadors. No inclou eines de soldadura ni recanvis addicionals, però tots els connectors són estàndard i fàcilment substituïbles o ampliables. Per a un muntatge segur, es recomana disposar de soldador, estany i tallacables.

XT60 connectors support up to 60 A continuous, XT90 up to 90 A, EC3 up to 60 A, EC5 up to 120 A, and the T connector generally supports up to 50 A, all within a typical voltage range of up to 500 V DC. It is important to respect these figures to avoid overheating and possible electrical failure, also taking into account the limits of the supplied cable (14 AWG, approximately 30 A continuous).

These connectors comply with standard electrical safety requirements for RC modelling, and it is essential to ensure correct crimping or soldering and to insulate all terminals with the included heat-shrink tubing. Always check polarity before connecting to avoid damage to equipment. Do not connect or disconnect under load to prevent sparking and contact wear.

The kit includes male and female connectors of each type, silicone cable and enough heat-shrink tubing to assemble multiple cables or adapters. It does not include soldering tools or additional spare parts, but all connectors are standard and easy to replace or expand. For safe assembly, a soldering iron, solder and wire cutters are recommended.

XT60 connectors support up to 60 A continuous, XT90 up to 90 A, EC3 up to 60 A, EC5 up to 120 A, and the T connector generally supports up to 50 A, all within a typical voltage range of up to 500 V DC. It is important to respect these figures to avoid overheating and possible electrical failure, also taking into account the limits of the supplied cable (14 AWG, approximately 30 A continuous).

These connectors comply with standard electrical safety requirements for RC modelling, and it is essential to ensure correct crimping or soldering and to insulate all terminals with the included heat-shrink tubing. Always check polarity before connecting to avoid damage to equipment. Do not connect or disconnect under load to prevent sparking and contact wear.

The kit includes male and female connectors of each type, silicone cable and enough heat-shrink tubing to assemble multiple cables or adapters. It does not include soldering tools or additional spare parts, but all connectors are standard and easy to replace or expand. For a safe assembly, a soldering iron, solder and wire cutter are recommended.

XT60-kontakter klarar upp till 60 A kontinuerligt, XT90 upp till 90 A, EC3 upp till 60 A, EC5 upp till 120 A, och T-kontakten klarar vanligtvis upp till 50 A, alla inom ett typiskt spänningsområde upp till 500 V DC. Det är viktigt att respektera dessa värden för att undvika överhettning och möjliga elektriska fel, med hänsyn till kabelns gränser (14 AWG, cirka 30 A kontinuerligt).