Kit accesorios GoPro Hero 33 piezas para HERO3+, HERO3, HERO2, HERO4 y SJ4000

El suport per a manillar inclòs està dissenyat per a diàmetres de tub entre 18 mm i 35 mm. Fora d’aquest rang pot haver-hi problemes d’ajust o de subjecció segura, per la qual cosa no es recomana el seu ús en superfícies més primes o més gruixudes.

Les cintes adhesives proporcionen un sol ús segur i no són reutilitzables un cop retirades. El kit inclou 6 adhesius (3 per a suports plans i 3 per a corbs), cobrint diversos muntatges, però per a instal·lacions successives caldrà adquirir adhesius compatibles de recanvi.

Es recomana inspeccionar visualment cada accessori abans d’utilitzar-lo, assegurant un ancoratge ferm a la càmera i a la superfície. En esports d’alt impacte o velocitat, prioritzeu l’ús dels tethers de seguretat inclosos i no depengueu únicament de l’adhesió o del plàstic per evitar la pèrdua de l’equip.

The included handlebar mount is designed for tube diameters between 18 mm and 35 mm. Outside this range, fit or secure fastening may be compromised, so it is not recommended for thinner or thicker surfaces.

The adhesive pads are for single secure use and are not reusable once removed. The kit includes 6 adhesive pads (3 for flat mounts and 3 for curved mounts), covering several installations, but for subsequent fittings you will need to purchase compatible replacement pads.

It is recommended to visually inspect each accessory before use, ensuring it is firmly attached to the camera and the surface. In high-impact or high-speed sports, prioritise the included safety tethers and do not rely solely on adhesive or plastic to avoid losing the equipment.

The included handlebar mount is designed for tube diameters between 18 mm and 35 mm. Outside this range, fit or secure fastening may be an issue, so use on thinner or thicker surfaces is not recommended.

The adhesive pads are for single secure use and are not reusable once removed. The kit includes 6 adhesives (3 for flat mounts and 3 for curved mounts), covering several installations, but for subsequent setups you will need to buy compatible replacement adhesives.

It is recommended to visually inspect each accessory before use, ensuring it is firmly attached to the camera and the surface. In high-impact or high-speed sports, prioritise the included safety tethers and do not rely solely on the adhesive or plastic to avoid losing the equipment.

Det medföljande styrefästet är utformat för rördiametrar mellan 18 mm och 35 mm. Utanför detta intervall kan passform eller säker fastsättning bli problematisk, så användning på tunnare eller tjockare ytor rekommenderas inte.