Cable de alimentación PC Schuko IEC de 3 metros - Conector angulado 90º

La secció de 0,75 mm² per conductor permet un corrent màxim continu aproximat de 6 A a 230 V, equivalent a uns 1.380 W. Per sobre d’aquest rang es poden produir sobreescalfaments, per la qual cosa no es recomana per a equips d’alt consum com servidors o calefactors potents.

Els connectors solen estar fabricats en poliamida resistent i contactes de llautó niquelat per a conductivitat i durabilitat. L’aïllament extern és PVC flexible estàndard, que proporciona protecció mecànica i dielèctrica d’acord amb normatives CE, però no és autoextingible de classe alta.

Sí, aquest tipus de cable habitualment compleix amb normatives CE per a equips elèctrics de baixa tensió (EN 60320-1), i els connectors IEC i Schuko solen portar els segells de seguretat apropiats. Convé verificar el mateix cable per identificar les marques de certificació específiques.

The 0.75 mm² cross-section per conductor allows an approximate continuous maximum current of 6 A at 230 V, equivalent to around 1,380 W. Above this range, overheating may occur, so it is not recommended for high-consumption equipment such as servers or powerful heaters.

The connectors are usually made from durable polyamide and nickel-plated brass contacts for conductivity and longevity. The outer insulation is standard flexible PVC, which provides mechanical and dielectric protection in line with CE regulations, but it is not high-grade self-extinguishing material.

Yes, this type of cable usually complies with CE regulations for low-voltage electrical equipment (EN 60320-1), and IEC and Schuko connectors usually carry the appropriate safety markings. It is advisable to check the cable itself to identify the specific certification marks.

The 0.75 mm² cross-section per conductor allows an approximate maximum continuous current of 6 A at 230 V, equivalent to around 1,380 W. Above this range, overheating may occur, so it is not recommended for high-consumption equipment such as servers or powerful heaters.

The connectors are usually made from durable polyamide and nickel-plated brass contacts for conductivity and durability. The outer insulation is standard flexible PVC, which provides mechanical and dielectric protection in line with CE regulations, but it is not high-grade self-extinguishing material.

Yes, this type of cable usually complies with CE regulations for low-voltage electrical equipment (EN 60320-1), and IEC and Schuko connectors usually carry the appropriate safety marks. It is advisable to check the cable itself for the specific certification markings.

Tvärsnittet på 0,75 mm² per ledare möjliggör en ungefärlig kontinuerlig maxström på 6 A vid 230 V, motsvarande cirka 1 380 W. Över detta intervall kan överhettning uppstå, ולכן rekommenderas den inte för högförbrukande utrustning som servrar eller kraftiga värmeelement.