Adaptador HDMI macho a 2 salidas HDMI hembra splitter satkit

L'adaptador HDMI d'1 a 2 sortides funciona com un duplicador de senyal, de manera que totes dues sortides mostren exactament la mateixa imatge (mirall). No és possible transmetre continguts diferents a cada sortida, ja que no fa funció de switch ni estén l'escriptori.

El rendiment de l'adaptador depèn tant de la qualitat dels cables HDMI connectats com de la font. Generalment admet resolucions fins a 1080p sense problemes apreciables; per a 4K o HDR poden produir-se pèrdues de senyal. Per evitar degradació, es recomana que la longitud total de tots els cables HDMI no superi els 5 metres per a resolucions Full HD (1080p).

No requereix configuració: és completament plug and play. Es connecta l'entrada HDMI al dispositiu font i les dues sortides als receptors. No integra circuits actius ni alimentació externa, cosa que limita el seu ús a senyals dins dels estàndards HDMI i pot no funcionar correctament amb dispositius de baixa potència en el senyal de sortida.

Els problemes freqüents són l'absència d'imatge en una o totes dues sortides, parpelleigs o pèrdua de sincronització, especialment en distàncies llargues o resolucions altes. Per evitar-ho, feu servir cables HDMI curts i de qualitat, i assegureu-vos que la font proporcioni prou potència de senyal. Per a configuracions més exigents (com 4K), es recomana un splitter HDMI actiu.

The 1-to-2 HDMI adapter works as a signal duplicator, so both outputs show exactly the same image (mirrored). It is not possible to send different content to each output, as it does not function as a switch or extend the desktop.

The adapter’s performance depends on both the quality of the connected HDMI cables and the source. It generally supports resolutions up to 1080p without noticeable issues; with 4K or HDR, signal loss may occur. To avoid degradation, it is recommended that the total length of all HDMI cables does not exceed 5 metres for Full HD (1080p) resolutions.

No configuration is required: it is fully plug and play. Connect the HDMI input to the source device and the two outputs to the receivers. It does not include active circuitry or external power, which limits its use to signals within HDMI standards and may not work properly with devices with a low output signal level.

Common issues are no image on one or both outputs, flickering or loss of sync, especially over long distances or at high resolutions. To avoid this, use short, good-quality HDMI cables and make sure the source provides sufficient signal power. For more demanding setups (such as 4K), an active HDMI splitter is recommended.

The 1-to-2 HDMI adapter works as a signal duplicator, so both outputs show exactly the same image (mirrored). It is not possible to send different content to each output, as it does not function as a switch or extend the desktop.

The adapter’s performance depends on both the quality of the connected HDMI cables and the source. It generally supports resolutions up to 1080p without noticeable issues; with 4K or HDR, signal loss may occur. To avoid degradation, it is recommended that the total length of all HDMI cables does not exceed 5 metres for Full HD (1080p) resolutions.