Herramienta de bloqueo temporal VW VAG 3036 T10172 para llave piñón y soporte de polea

L'eina està fabricada en acer tractat per oferir resistència mecànica i durabilitat. Les seves dimensions són 415 mm de longitud total i una obertura màxima de mordassa de 0 a 140 mm. El pes sol estar entre 1 i 1,2 kg aproximadament. En rebre-la, normalment la caixa inclou la clau mateixa i, en alguns casos, instruccions bàsiques; no inclou altres accessoris.

És imprescindible assegurar una correcta fixació de l'eina abans d'aplicar força, per evitar lliscaments o danys a l'arbre de lleves o a la politja. Es recomana fer servir protecció personal (guants i ulleres) i no excedir mai el parell recomanat pel fabricant del motor. No utilitzeu l'eina per a finalitats diferents de les indicades.

Després de cada ús, es recomana netejar l'eina per retirar restes d'oli i brutícia, i aplicar un lubricant lleuger a les parts mòbils per prevenir la corrosió. Guardeu-la en un lloc sec. No cal un manteniment complex; la inspecció visual periòdica per detectar deformacions o desgast és suficient.

The tool is made from treated steel to provide mechanical strength and durability. Its dimensions are 415 mm overall length and a maximum jaw opening of 0 to 140 mm. The weight is usually around 1 to 1.2 kg. When received, the box normally includes the wrench itself and, in some cases, basic instructions; no other accessories are included.

It is essential to secure the tool correctly before applying force, to avoid slipping or damage to the camshaft or pulley. Personal protective equipment (gloves and goggles) is recommended, and the torque specified by the engine manufacturer must never be exceeded. Do not use the tool for purposes other than those indicated.

After each use, it is recommended to clean the tool to remove oil and dirt, and apply a light lubricant to moving parts to prevent corrosion. Store in a dry place. No complex maintenance is required; periodic visual inspection for deformation or wear is sufficient.

The tool is made from treated steel to provide mechanical strength and durability. Its dimensions are 415 mm overall length and a maximum jaw opening of 0 to 140 mm. The weight is usually around 1 to 1.2 kg. When received, the box normally includes the wrench itself and, in some cases, basic instructions; no other accessories are included.

It is essential to secure the tool correctly before applying force, to avoid slipping or damage to the camshaft or pulley. Personal protective equipment (gloves and goggles) is recommended, and the torque specified by the engine manufacturer must never be exceeded. Do not use the tool for purposes other than those indicated.

After each use, it is recommended to clean the tool to remove oil and dirt, and apply a light lubricant to moving parts to prevent corrosion. Store in a dry place. No complex maintenance is required; periodic visual inspection for deformation or wear is sufficient.

Verktyget är tillverkat av behandlat stål för att ge mekanisk styrka och hållbarhet. Måtten är 415 mm total längd och maximal käköppning från 0 till 140 mm. Vikten ligger vanligtvis på cirka 1–1,2 kg. Vid leverans ingår normalt själva nyckeln och, i vissa fall, grundläggande instruktioner; inga andra tillbehör ingår.