ESP32 Dev Kit Arduino Compatible con Bluetooth y Wifi para Hogar Inteligente

La placa ESP32 Dev Kit típicament mesura 58 mm x 25.5 mm x 13 mm i pesa aproximadament 14 g. El paquet estàndard inclou només la placa muntada; no es subministren cables USB ni headers addicionals, tret que el proveïdor indiqui el contrari.

L’ESP32 Dev Kit funciona amb tensions de 3.3 V o 5 V, però subministrar una tensió superior a 5.5 V pot danyar permanentment la placa. Es recomana utilitzar fonts regulades i evitar l’alimentació directa des de fonts no controlades. Incorporar un díode i un fusible en línia ajuda a prevenir sobreintensitats i polaritats invertides.

L’ESP32 Dev Kit té un rang operatiu típic de temperatura entre -40°C i +85°C; tanmateix, la humitat relativa recomanada és del 10%–90% sense condensació. Operar fora d’aquests rangs pot causar funcionament inestable o danys permanents.

The ESP32 Dev Kit board typically measures 58 mm x 25.5 mm x 13 mm and weighs approximately 14 g. The standard package includes only the assembled board; USB cables and additional headers are not supplied unless stated otherwise by the supplier.

The ESP32 Dev Kit operates with 3.3 V or 5 V, but supplying more than 5.5 V can permanently damage the board. It is recommended to use regulated power supplies and avoid direct power from uncontrolled sources. Adding an in-line diode and fuse helps prevent overcurrent and reverse polarity.

The ESP32 Dev Kit has a typical operating temperature range of -40°C to +85°C; however, the recommended relative humidity is 10%–90% non-condensing. Operating outside these ranges may cause unstable operation or permanent damage.

The ESP32 Dev Kit board typically measures 58 mm x 25.5 mm x 13 mm and weighs approximately 14 g. The standard package includes only the assembled board; no USB cable or additional headers are supplied unless otherwise stated by the supplier.

The ESP32 Dev Kit operates at 3.3 V or 5 V, but supplying more than 5.5 V can permanently damage the board. It is recommended to use regulated power supplies and avoid direct power from uncontrolled sources. Adding an in-line diode and fuse helps prevent overcurrent and reverse polarity.

The ESP32 Dev Kit has a typical operating temperature range of -40°C to +85°C; however, the recommended relative humidity is 10%–90% non-condensing. Operating outside these ranges may cause unstable operation or permanent damage.

ESP32 Dev Kit-kortet mäter vanligtvis 58 mm x 25.5 mm x 13 mm och väger cirka 14 g. Standardpaketet innehåller endast det monterade kortet; USB-kabel och extra headers medföljer inte, om inte leverantören anger annat.