Cable Adaptador Harley Davidson OBD1 6 Pines a OBDII 16 Pines para Diagnóstico

El cable té una longitud aproximada de 20 cm i un pes net de 100 g. El paquet inclou únicament un cable adaptador de 6 pins mascle a 16 pins femella.

El cable és un adaptador passiu, dissenyat per a senyals estàndard de diagnosi automotriu (típicament 12 V). La seva durabilitat dependrà del maneig físic, ja que no té components electrònics interns subjectes a desgast per voltatge, però cal evitar sotmetre els pins a tensió excessiva.

A diferència d’un adaptador universal, aquest model està dissenyat específicament per a la disposició de pins i el protocol de comunicació de Harley Davidson OBD1 de 6 pins, garantint la correspondència correcta. Els genèrics poden no funcionar o provocar lectures errònies en aquestes motocicletes.

No tools or advanced technical skills are required; simply connect the 8-pin end to the truck and the OBD2 end to the compatible diagnostic scanner. It is recommended to switch off the electrical system before connecting to avoid false readings.

This cable is only a physical adapter and does not alter signals or protocols. It passes the Volvo 8-pin truck connections to the 16-pin OBD2 standard. Its operation depends on your scanner's compatibility with the protocols implemented in the truck. It does not adapt voltage differences or protocols such as J1708/J1587.

A universal OBD2 adapter will not be useful for Volvo trucks with 8-pin ports, as these use a physical connector and, in some cases, proprietary protocols. This cable makes the connection easier without damaging pins or requiring additional electrical conversion, offering a specific and safe solution for older Volvo vehicles.

No tools or advanced technical skills are required; simply connect the 8-pin end to the truck and the OBD2 end to the compatible diagnostic scanner. It is recommended to switch off the electrical system before connecting to avoid false readings.

This cable is only a physical adapter and does not alter signals or protocols. It carries the Volvo truck’s 8-pin connections to the 16-pin OBD2 standard. Its operation depends on your scanner being compatible with the protocols used in the truck. It does not adapt voltage differences or protocols such as J1708/J1587.

A universal OBD2 adapter will not be useful for Volvo trucks with 8-pin ports, as these use a different physical connector and, in some cases, proprietary protocols. This cable makes the connection without damaging pins or requiring additional electrical conversion, offering a specific and safe solution for older Volvo vehicles.

Den kräver inga verktyg eller avancerade tekniska kunskaper; det räcker att ansluta 8-poliga änden till lastbilen och OBD2-änden till den kompatibla diagnosskannern. Det rekommenderas att stänga av elsystemet innan anslutning för att undvika felaktiga avläsningar.