Bote bolas estaño con plomo 0,76mm 250.000 unidades para soldadura

El producte consisteix en un pot amb aproximadament 250.000 boles de 0,76 mm de diàmetre. El pes net depèn de la quantitat i densitat del material, estimant-se al voltant d'1 kg pel total de boles. El pot està fabricat per a un emmagatzematge segur, però es recomana confirmar el pes amb el proveïdor per a casos crítics.

Com que conté plom, s'ha d'emmagatzemar en recipients tancats, lluny d'aliments, i manipular amb guants per evitar el contacte directe. Es recomana un espai ventilat i complir les normatives locals sobre materials perillosos. És essencial rentar-se les mans després d'utilitzar-lo i gestionar adequadament els residus.

Les boles amb plom tenen un punt de fusió més baix (~183 °C) i millor fluïdesa, facilitant els processos i reduint danys tèrmics a components sensibles. Les alternatives sense plom solen fondre per sobre de 217 °C, exigint temperatures més altes i poden augmentar l'estrès tèrmic. No compleixen RoHS si es requereix normativa ambiental.

El contingut reportat és exclusivament el pot amb les boles de 0,76 mm; no s'hi inclouen eines de dosificació ni accessoris per a la manipulació, per la qual cosa es recomana adquirir aplicadors adequats si es necessita un maneig precís.

The product consists of a tub containing approximately 250,000 balls of 0.76 mm diameter. Net weight depends on the quantity and density of the material, estimated at around 1 kg for the total number of balls. The tub is designed for safe storage, but it is recommended to confirm the weight with the supplier for critical cases.

As it contains lead, it should be stored in sealed containers, away from food, and handled with gloves to avoid direct contact. A ventilated area is recommended, and local regulations on hazardous materials should be followed. Hand washing after use and proper waste disposal are essential.

Lead balls have a lower melting point (~183 °C) and better flow, making the process easier and reducing thermal damage to sensitive components. Lead-free alternatives usually melt above 217 °C, requiring higher temperatures and potentially increasing thermal stress. They do not comply with RoHS if environmental compliance is required.

The reported contents are exclusively the tub with the 0.76 mm balls; no dispensing tools or handling accessories are included, so it is recommended to buy suitable applicators if precise handling is required.

The product consists of a tub containing approximately 250,000 balls of 0.76 mm diameter. The net weight depends on the quantity and density of the material, estimated at around 1 kg for the total number of balls. The tub is designed for safe storage, but it is recommended to confirm the weight with the supplier for critical cases.

Because it contains lead, it should be stored in closed containers, away from food, and handled with gloves to avoid direct contact. A ventilated area is recommended, and local regulations on hazardous materials should be followed. Handwashing after use and proper waste disposal are essential.