Base profesional de succión para apertura de pantalla iPhone 4/4s/5/5c/5s/6/6 Plus y smartphones

La base està fabricada en polímer ABS d'alta resistència, i les ventoses són de silicona de grau industrial per assegurar una bona adherència sense ratllar el vidre. Les dimensions típiques són 120 mm x 65 mm x 55 mm i el pes aproximat és de 150 g. Pot haver-hi lleugeres variacions segons el lot.

Les ventoses només requereixen una neteja regular amb aigua i sabó neutre per preservar-ne l'adherència i evitar residus. La seva vida útil supera els 500 cicles d'ús en condicions normals, tot i que es poden degradar abans si s'exposen a solvents forts o a altes temperatures.

El risc de dany és baix si s'utilitza correctament: és clau aplicar força progressiva i assegurar-se que la ventosa estigui ben adherida sobre una superfície neta. Forçar l'obertura lateralment o sobre marcs flexibles pot incrementar el risc. No intentis mai obrir pantalles en fred o sense escalfar els adhesius si cal segons el fabricant.

The base is made from high-strength ABS polymer, and the suction cups are made from industrial-grade silicone to ensure good grip without scratching the glass. Typical dimensions are 120 mm x 65 mm x 55 mm and the approximate weight is 150 g. Slight variations may occur depending on the batch.

The suction cups only require regular cleaning with water and neutral soap to preserve grip and prevent residue build-up. Their service life exceeds 500 use cycles under normal conditions, although they may degrade sooner if exposed to strong solvents or high temperatures.

The risk of damage is low if used correctly: it is key to apply force gradually and ensure the suction cup is firmly attached to a clean surface. Forcing the opening sideways or on flexible frames can increase the risk. Never attempt to open screens cold or without heating the adhesive if required by the manufacturer.

The base is made from high-strength ABS polymer, and the suction cups are made from industrial-grade silicone to ensure good grip without scratching the glass. Typical dimensions are 120 mm x 65 mm x 55 mm and the approximate weight is 150 g. Slight variations may occur depending on the batch.

The suction cups only require regular cleaning with water and mild soap to preserve grip and avoid residue. Their service life exceeds 500 use cycles under normal conditions, although they may degrade sooner if exposed to strong solvents or high temperatures.

The risk of damage is low if used correctly: it is essential to apply force gradually and make sure the suction cup is firmly attached to a clean surface. Forcing the opening sideways or on flexible frames can increase the risk. Never try to open screens cold or without heating the adhesive if required by the manufacturer.

Basen är tillverkad av högresistent ABS-polymer, och sugkopparna är av silikon i industriklass för att säkerställa bra fäste utan att repa glaset. Typiska mått är 120 mm x 65 mm x 55 mm och ungefärlig vikt är 150 g. Små variationer kan förekomma beroende på batch.