Convertidor Toyota 22 pin a OBDII 16 pin para diagnóstico automotriz

El convertidor utilitza cables de coure recoberts de PVC i connectors de polímer ABS resistent. Les dimensions típiques del cable són 30 cm de longitud, amb connectors d'aproximadament 50 mm x 35 mm x 20 mm a cada extrem. El pes aproximat és de 120 g.

El disseny passiu del convertidor minimitza riscos; no introdueix voltatges ni senyals actius. Tanmateix, una connexió física forçada o defectuosa podria danyar el connector. Es recomana sempre apagar el vehicle abans de connectar o desconnectar l'adaptador.

A diferència dels adaptadors universals, aquest convertidor està optimitzat per a l'estàndard de pins Toyota OBDI (22p), assegurant una connexió directa sense interferència de pins o senyals erronis. Tanmateix, només serveix per a Toyotas amb aquest port específic, no per a altres marques o sistemes OBDI diferents.

The converter uses copper cables coated in PVC and connectors made from durable ABS polymer. Typical cable dimensions are 30 cm in length, with connectors of approximately 50 mm x 35 mm x 20 mm at each end. Approximate weight is 120 g.

The passive design of the converter minimises risk; it does not introduce active voltages or signals. However, a forced or faulty physical connection could damage the connector. It is always recommended to switch off the vehicle before connecting or disconnecting the adapter.

Unlike universal adapters, this converter is optimised for the Toyota OBDI (22-pin) standard, ensuring a direct connection without pin interference or false signals. However, it only works with Toyotas that have this specific port, not with other brands or different OBDI systems.

The converter uses copper cables coated in PVC and connectors made from durable ABS polymer. Typical cable dimensions are 30 cm in length, with connectors of approximately 50 mm x 35 mm x 20 mm at each end. The approximate weight is 120 g.

The passive design of the converter minimises risks; it does not introduce voltages or active signals. However, a forced or faulty physical connection could damage the connector. It is always recommended to switch off the vehicle before connecting or disconnecting the adapter.

Unlike universal adapters, this converter is optimised for the Toyota OBDI (22-pin) standard, ensuring a direct connection without pin interference or incorrect signals. However, it only works for Toyotas with that specific port, not for other brands or different OBDI systems.

Konvertern använder kopparkablar med PVC-beläggning och kontakter i slitstark ABS-polymer. Typiska mått för kabeln är 30 cm i längd, med kontakter på cirka 50 mm x 35 mm x 20 mm i vardera änden. Den ungefärliga vikten är 120 g.