Estación separador pantallas LCD Mlink LCD3 para iPhone 4/4S/5/5S/5C y Galaxy S3 S4

El control digital del Mlink LCD3 permet una regulació precisa en increments d’1 °C, cosa que millora la uniformitat tèrmica i minimitza els riscos de dany als adhesius o pantalles. Això és superior als controls analògics, que solen presentar variacions i menys exactitud en el manteniment de la temperatura establerta.

La superfície calefactora d’alumini del Mlink LCD3 fa 200 mm x 110 mm i admet pantalles d’entre 4" i 7" (≈101,6 mm a 177,8 mm en diagonal). Les pantalles fora d’aquest rang podrien no fixar-se correctament o rebre calor de manera desigual.

L’equip és multivoltatge i pot funcionar a 110 V/220 V, 50 Hz. Inclou protecció bàsica, però es recomana verificar que l’endoll i el cable siguin adequats a cada regió i evitar l’ús d’adaptadors sense certificació per garantir la seguretat.

La làmina de silicona té una vida útil que sol oscil·lar entre 150 i 300 usos, depenent de la càrrega tèrmica i del tracte. Tot i que no sempre s’inclou un recanvi al paquet, habitualment hi ha consumibles compatibles al mercat per a la reposició, cosa rellevant per al manteniment a llarg termini.

The Mlink LCD3 digital control allows precise adjustment in 1°C increments, improving thermal uniformity and minimising the risk of damage to adhesives or screens. This is better than analogue controls, which usually show variations and less accuracy in maintaining the set temperature.

The Mlink LCD3 aluminium heating surface measures 200 mm x 110 mm and supports screens from 4" to 7" (≈101.6 mm to 177.8 mm diagonally). Screens outside this range may not be held properly or may receive heat unevenly.

The equipment is multi-voltage and can operate at 110 V/220 V, 50 Hz. It includes basic protection, but it is recommended to check that the plug and cable are suitable for each region and to avoid uncertified adapters to ensure safety.

The silicone sheet usually has a service life of between 150 and 300 uses, depending on thermal load and handling. Although a spare is not always included in the package, compatible consumables are usually available on the market for replacement, which is important for long-term maintenance.

The digital control of the Mlink LCD3 allows precise adjustment in 1°C increments, improving thermal uniformity and minimising the risk of damage to adhesives or screens. This is better than analogue controls, which usually have variations and less accuracy in maintaining the set temperature.

The aluminium heating surface of the Mlink LCD3 measures 200 mm x 110 mm and supports screens from 4" to 7" (≈101.6 mm to 177.8 mm diagonal). Screens outside this range may not be held properly or may receive heat unevenly.