Jeringa pistola de succion de aceite 500cc TSX TOOL para mantenimiento automotriz

La xeringa està fabricada principalment en alumini anoditzat, cosa que li aporta resistència a la corrosió i lleugeresa. El tub d'aspiració flexible és de PVC transparent, adequat per a olis minerals, fluid de transmissions i altres líquids automotrius comuns. Tanmateix, no es recomana l'ús amb líquids molt corrosius o solvents agressius com àcids o gasolina pura.

Per evitar fuites, és important verificar que el segell del pistó estigui en bon estat i que el tub estigui ben connectat abans de l'ús. Després de cada aplicació, es recomana desmuntar el cilindre i netejar-lo amb un drap no abrasiu i detergent neutre. No excediu la pressió manual recomanada, ja que pot deteriorar els segells interns a llarg termini.

Generalment, el fabricant proporciona tubs de recanvi compatibles i és possible adquirir juntes de pistó estàndard en ferreteries o tallers especialitzats. La disponibilitat pot variar segons la regió i el distribuïdor; es recomana consultar el catàleg de peces o el servei postvenda per assegurar la compatibilitat dels recanvis.

The syringe is mainly made from anodised aluminium, which gives it corrosion resistance and light weight. The flexible suction tube is made from transparent PVC, suitable for mineral oils, transmission fluid and other common automotive liquids. However, it is not recommended for use with highly corrosive liquids or aggressive solvents such as acids or neat petrol.

To prevent leaks, it is important to check that the piston seal is in good condition and that the tube is properly connected before use. After each application, it is recommended to dismantle the cylinder and clean it with a non-abrasive cloth and neutral detergent. Do not exceed the recommended manual pressure, as this may damage the internal seals over time.

Generally, the manufacturer supplies compatible replacement tubes, and standard piston seals can be purchased from hardware stores or specialist workshops. Availability may vary depending on the region and distributor; it is recommended to check the parts catalogue or after-sales service to ensure compatibility of the spare parts.

The syringe is mainly made from anodised aluminium, which gives it corrosion resistance and a lightweight build. The flexible suction tube is made from transparent PVC, suitable for mineral oils, transmission fluid and other common automotive liquids. However, it is not recommended for use with highly corrosive liquids or aggressive solvents such as acids or pure petrol.

To prevent leaks, it is important to check that the plunger seal is in good condition and that the tube is securely connected before use. After each application, it is recommended to dismantle the cylinder and clean it with a non-abrasive cloth and neutral detergent. Do not exceed the recommended manual pressure, as this may damage the internal seals over time.

In general, the manufacturer supplies compatible replacement tubes, and standard plunger seals can be purchased from hardware stores or specialist workshops. Availability may vary depending on the region and distributor; it is recommended to check the parts catalogue or after-sales service to ensure compatibility of the replacement parts.

Sprutan är huvudsakligen tillverkad av anodiserad aluminium, vilket ger korrosionsbeständighet och låg vikt. Det flexibla sugröret är av transparent PVC, lämpligt för mineraloljor, transmissionsolja och andra vanliga bilvätskor. Det rekommenderas dock inte för mycket frätande vätskor eller aggressiva lösningsmedel som syror eller ren bensin.