Termómetro digital con sonda exterior para acuarios y terrarios HT-1 Uyigao

El termòmetre està fabricat majoritàriament en plàstic ABS resistent i la sonda utilitza metall per al sensor amb un cable aïllat de PVC. La carcassa no és impermeable i ofereix una tolerància limitada a la humitat; per tant, es recomana mantenir la unitat de lectura fora de zones humides i exposar només la sonda segons la necessitat.

Aquest model proporciona una precisió de ±0,1 °C i un rang de mesura de -50 °C a +70 °C, destacant per sobre d’alternatives de baix cost (que solen tenir precisions de ±1 °C). La pantalla funciona entre -10 °C i +50 °C, de manera que en entorns extrems només la lectura digital podria veure’s afectada.

Es recomana inserir només la sonda a la zona on cal mesurar la temperatura (aigua, substrat o aire), assegurant que el cable no quedi sota tensió. El cos amb pantalla s’ha de mantenir fora de la zona humida, preferiblement fixat al marc del terrari o al panell exterior amb el seu disseny d’encaix.

A causa del seu baix voltatge i ús amb bateries, el producte no requereix certificacions elèctriques específiques. Tanmateix, compleix els estàndards habituals de seguretat per a aparells classe III i segueix toleràncies internacionals de mesura per a equips domèstics, tot i que no està certificat per a entorns industrials regulats.

The thermometer is mostly made from durable ABS plastic, and the probe uses metal for the sensor with a PVC-insulated cable. The casing is not waterproof and has limited resistance to moisture; therefore, it is recommended to keep the display unit away from damp areas and expose only the probe as needed.

This model provides an accuracy of ±0.1°C and a measuring range of -50°C to +70°C, standing out from low-cost alternatives, which usually have an accuracy of ±1°C. Its display operates between -10°C and +50°C, so in extreme environments only the digital reading may be affected.

It is recommended to place only the probe in the area where temperature needs to be measured (water, substrate or air), making sure the cable is not under tension. The display body should be kept outside the damp area, preferably fixed to the terrarium frame or an external panel using its clip-in design.

Due to its low voltage and battery operation, the product does not require specific electrical certifications. However, it complies with the usual safety standards for Class III devices and follows international measurement tolerances for domestic equipment, although it is not certified for regulated industrial environments.

The thermometer is made mostly from durable ABS plastic, and the probe uses metal for the sensor with an insulated PVC cable. The casing is not waterproof and offers limited resistance to moisture; therefore, it is recommended to keep the display unit away from damp areas and expose only the probe as needed.

This model provides an accuracy of ±0.1°C and a measuring range of -50°C to +70°C, standing out from low-cost alternatives, which usually have accuracies of ±1°C. Its display operates between -10°C and +50°C, so in extreme environments only the digital reading may be affected.