Cinta Kapton 30mm resistente al calor para soldadura y electrónica

La cinta Kapton de 30 mm resisteix temperatures contínues de fins a 260 °C. Aquesta propietat la fa ideal per a processos de soldadura per reflow o reparació BGA, ja que manté l’adherència i l’aïllament sense desprendre’s ni degradar-se en els cicles tèrmics típics del sector electrònic.

El rotlle conté 33 metres de llarg per 30 mm d’ample i sol pesar entre 100-120 g. Està compost de poliimida (Kapton) amb adhesiu de silicona, reconegut per la seva alta resistència tèrmica i dielèctrica.

L’adhesiu de silicona resisteix l’engroguiment i l’enduriment durant exposicions prolongades a la calor. Per a una màxima durabilitat, es recomana evitar contaminants (pols, greix) durant l’aplicació i no sotmetre’l a esforços mecànics intensos repetits.

La cinta Kapton sovint compleix les normes UL94 V-0 (retardant de flama) i RoHS (lliure de substàncies perilloses), habitualment requerides en productes electrònics. Tanmateix, és recomanable verificar la certificació específica del lot amb el proveïdor.

The 30 mm Kapton tape withstands continuous temperatures of up to 260 °C. This makes it ideal for reflow soldering or BGA repair, as it maintains adhesion and insulation without peeling away or degrading during the typical thermal cycles used in electronics.

The roll is 33 metres long and 30 mm wide, and usually weighs between 100-120 g. It is made from polyimide (Kapton) with a silicone adhesive, known for its high thermal and dielectric resistance.

The silicone adhesive resists yellowing and hardening during prolonged heat exposure. For maximum durability, it is recommended to avoid contaminants (dust, grease) during application and not to subject it to repeated heavy mechanical stress.

Kapton tape often complies with UL94 V-0 (flame retardant) and RoHS (free from hazardous substances), which are commonly required in electronic products. However, it is advisable to verify the specific batch certification with the supplier.

The 30 mm Kapton tape withstands continuous temperatures of up to 260 °C. This makes it ideal for reflow soldering or BGA repair, as it maintains its adhesion and insulation without peeling away or degrading during the typical thermal cycles used in electronics.

The roll contains 33 metres of tape by 30 mm wide and usually weighs between 100-120 g. It is made from polyimide (Kapton) with silicone adhesive, known for its high thermal and dielectric resistance.