Juego llaves inglesas abocinadas 8-19mm set 6 piezas TSX TOOL

El set complet fa 25 x 16 x 2 cm i té un pes total de 0,70 kg. Cada clau té mides específiques: 8x10 mm, 9x11 mm, 10x12 mm, 13x14 mm, 14x17 mm i 17x19 mm. No s’especifica el pes individual de cada clau, però es pot estimar al voltant de 0,10-0,15 kg per peça segons la mida.

Es recomana netejar les claus després de l’ús per evitar l’acumulació de brutícia o residus corrosius. L’acabat polit ajuda a prevenir la corrosió superficial, però en ambients humits és aconsellable aplicar una fina capa d’oli protector i guardar-les en un lloc sec. No cal un polit especial en condicions d’ús normal.

No es declara explícitament la tolerància dimensional, però habitualment en claus de qualitat la tolerància és de ±0,02 mm per al rang de 8-19 mm. L’acer crom-vanadi tractat redueix significativament el risc d’ovalització si s’utilitzen segons especificació. No hi ha constància de certificació ISO o DIN expressada a la fitxa, per la qual cosa la garantia de norma internacional queda subjecta a verificació directa amb el fabricant.

The full set measures 25 x 16 x 2 cm and has a total weight of 0.70 kg. Each spanner has specific sizes: 8x10 mm, 9x11 mm, 10x12 mm, 13x14 mm, 14x17 mm and 17x19 mm. The individual weight of each spanner is not specified, but it can be estimated at around 0.10-0.15 kg per piece depending on size.

It is recommended to clean the spanners after use to prevent the build-up of dirt or corrosive residue. The polished finish helps prevent surface corrosion, but in humid environments it is advisable to apply a thin layer of protective oil and store them in a dry place. No special polishing is required under normal use conditions.

The dimensional tolerance is not explicitly stated, but in quality spanners it is commonly around ±0.02 mm for the 8-19 mm range. The treated chrome-vanadium steel significantly reduces the risk of ovalisation if used as specified. There is no stated ISO or DIN certification on the product sheet, so any guarantee of an international standard should be verified directly with the manufacturer.

The complete set measures 25 x 16 x 2 cm and has a total weight of 0.70 kg. Each spanner has specific sizes: 8x10 mm, 9x11 mm, 10x12 mm, 13x14 mm, 14x17 mm and 17x19 mm. The individual weight of each spanner is not specified, but it can be estimated at around 0.10-0.15 kg per piece depending on size.

It is recommended to clean the spanners after use to prevent the build-up of dirt or corrosive residues. The polished finish helps prevent surface corrosion, but in damp environments it is advisable to apply a thin layer of protective oil and store them in a dry place. No special polishing is needed under normal use conditions.

The dimensional tolerance is not explicitly stated, but in quality spanners it is commonly around ±0.02 mm for the 8-19 mm range. The treated chrome-vanadium steel significantly reduces the risk of ovalisation if used as specified. There is no evidence of ISO or DIN certification stated in the listing, so any guarantee of an international standard is subject to direct verification with the manufacturer.

Hela satsen mäter 25 x 16 x 2 cm och har en totalvikt på 0,70 kg. Varje nyckel har specifika storlekar: 8x10 mm, 9x11 mm, 10x12 mm, 13x14 mm, 14x17 mm och 17x19 mm. Den individuella vikten för varje nyckel anges inte, men kan uppskattas till cirka 0,10–0,15 kg per styck beroende på storlek.