Dpa5 Protocol Adapter Heavy Duty Truck Scanner

Dpa5 Protocol Adapter Heavy Duty Truck Scanner

DPA5 Protocol Adapter Heavy Duty Truck Scanner

Description:

- The DPA 5 continues DG Technologies DPA family tradition of being the fastest, most rugged, most reliable and the most versatile RP1210 Vehicle Datalink Adapters (VDAs), and its wireless.

- The DPA 5 is a One-Tool-Solution, supporting OEM and component diagnostic applications. The DPA 5 is all you need.

- From inception to deployment, the DPA 5 was built for speed-critical applications such as End-Of-Line (EOL) programming stations and the re-flashing of Electronic Control Units/Modules (ECUs/ECMs). In fact, the DPA 5 was significantly faster than the other leading adapters. This means significantly reduced reprogramming and diagnostic sessions, leading to a fast return on investment (ROI)...

- The DPA 5 has Dual CAN communication channels. This allows the DPA 5 to communicate with vehicles having two separate CAN data buses, such as the Freightliner Cascadia.

Include:

DPA5 Adapter

6/9 pin cable

OBDII cable

Bluetooth USB Dongle

USB Cable (Goes from your computer to the DPA5)

Drivers CD

Diagnostic software CD

Plastic carrying case

Installation manual

Features:

- Read and display J1587 and J1939 faults in "text" form. Request clear of inactive J1587 and J1939 faults.

- Display "total-vehicle" and "trip data" such as odometer, engine hours, and fuel economy from the J1587 and J1939 data buses.

- Create a viewable/printable/saveable vehicle report in HTML format showing all information that has been captured.

- Display common "dashboard" parameters such as RPM, temperatures and pressures from the J1587 and J1939 data buses.

- Request reset of J1939 trip information (trip odometer, trip miles, trip fuel, etc).

- Display J1587 and J1939 ECM component information such as VIN, Make, Model, Serial, and Unit Numbers.

- Record data bus data for engineering analysis as well as play that data back internally through the program or externally to the data bus.

- Configure and launch OEM applications directly without having to navigate through the Windows Start Menu.

- The DPA 5 provides more protocol, standards, and operating system support than any other commercially available diagnostic adapter. 

- Support and standards include DPA 5 RP1210 OEM Diagnostic Software Compatibility

- The DPA 5 is RP1210A compliant and should work with any RP1210A compliant application. 

- The DPA 5 should be able to reprogram all CAN/ISO15765 vehicles, GM vehicles using the J1850 Variable Pulse Width (VPW) protocol, or other vehicles using the DPA 5 J2534-supported protocols.

- It has been thoroughly validated against the following OEM and component applications as:

Allison DOC

Bendix ACOM

Caterpillar Electronic Technician

Cummins Insite

Cummins PowerSpec

Dana Diagnostic Tool

Detroit Diesel Diagnostic Link

Detroit Diesel Reprogramming Station

Eaton ServiceRanger

Freightliner ServiceLink

International Diamond Logic Builder

International InTune

International Master Diagnostics

International ServiceMaxx

Mack VCADS/PTT

Meritor-WABCO Toolbox

Mitchell1 RepairConnect

Perkins EST

Vansco VMMS

Volvo VCADS/PTT

ZF-Meritor TransSoft

Pocket Fleet Diagnose

The DPA 5 has been validated against the following OEM and component applications:

General Motors TIS2Web

Ford Module Programming (FMP)

Chrysler J2534 Application

Toyota TIS (Technical Information System)

Honda Service Express

Mazda Module Programming (MMP)

Kia J2534 KMA

Hyundai 2534 HMA

Volkswagen Erwin

Audi Erwin

Nissan J2534 ECU Reprogramming Software (NERS)

RA Consulting Silver Scan Tool

All J2534 reprogramming and diagnostic software packages that are J2534-1 and J2534-2 compliant and use a protocol supported by the DPA 5 should work as long as the operating system is supported by the application. Note that not all OEMs have released J2534-2 compliant software.

The DPA 5 provides more protocol, standards, and operating system support than any other commercially available diagnostic adapter. Support and standards include:

RP1210 Protocols: J1939, J1708 / J1587, CAN ,J1850 (VPW - GM) ,ISO15765 ,ISO9141 / KWP2000 ,ALDL

J2534 Protocols: CAN (Raw CAN) ,J1850 VPW (GM Class II) ,ISO 15765-4 ,GMLAN (HSCAN, SWCAN) ,ISO 14230 (KWP2000) ,ISO 9141-2 ,J1708/J1587 ,J1939

Standards: TMC RP1210B ,TMC RP1210A ,SAE J2534 ,SAE J1979 ,VEPS J2214 / J2461 ,CE Compliant ,FCC/IC Certified

Other protocols: GMLAN ,J2284 (CAN @500k) ,J2411 (GM SWCAN) ,ISO9141 / KWP2000 ,ALDL

PC requirements to use the DPA 5:

Windows XP, 2000, Vista (32/64-bit), 7 (32/64-bit), Windows 8 (32/64-bit)

IBM-Compatible, 1GHz or faster

256MB RAM (512MB Preferred)

25 MB Free Hard-Disk Space

USB Port, USB Version 1.1 or Higher

Computer Administrator Privileges