Short descriptio
3s 60a Enhanced Version Protection Board Pcb For Lithium Battery3S 60A Enhanced Version Protection Board PCB for Lithium BatteryDescription: - 3S 60A Enhanced Version- Nominal voltage of 3.7V and full voltage of 4.2... Read more...
3s 60a Enhanced Version Protection Board Pcb For Lithium Battery
3S 60A Enhanced Version Protection Board PCB for Lithium Battery
Description:
- 3S 60A Enhanced Version
- Nominal voltage of 3.7V and full voltage of 4.2V lithium battery (including 18650, 26650, polymer lithium battery)
- Charging voltage: 12.6V - 13.6V
- Continuous discharge current (upper limit): 60A (if the cooling environment is not good, please reduce the load current use)
- Material: PCB
- Colour: green
- Tamaño: 41x55x3.4mm
Specifications:
- The successful start requires three 15C-20C power battery, or six 10C-15C power battery.
- Strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
- When the load is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike.
- 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series.
Include:
1 x 3S 60A Enhanced Version Protection Board PCB for Lithium Battery
Tags: 3s-60a, enhanced, version, protection, board, pcb, lithium, battery-60a, enhanced, version, protection, board, pcb, lithium, battery, standard