T-1000s Sd Card Rgb Led Pixel Controller Dmx512 Ws2811 Ws2801 Lpd8806 Lpd8809 +

T-1000s Sd Card Rgb Led Pixel Controller Dmx512 Ws2811 Ws2801 Lpd8806 Lpd8809 +

T1000-S RGB Pixel controller is an advanced controller that enables you to create stunning LED light displays,
shop signs, LED matrixes and screens and many more applications. It supports advanced pixel layouts all configurable from the
software provided (LedEdit 2013). Each controller supports up to a maximum of 2048 pixels. More than one controller can be
chained together to enable larger displays. All programs are stored on the SD card provided (16 programms MAX) and can be
cycled through with a push of a button on the controller. The speed of each program can also be adjusted with buttons on the
controller.

T-1000S has a built in support for single line and dual line LED ICs. If controlling up to 512 pixels speeds can reach 30fps.
If more than 512 pixels are attached fps will decrease automaticaly.

This controller supports many popular LED chips such as:
– LPD8806, LPD8809, WS2801,WS2803, WS2811 and many more (see below for a full list)

Note: Although we will do our best to answer all your questions unfortunately we are unable to provide any
software support.

Specification

Input voltage: 5-24V
Dimensions: 6.30 in x 2.95 in x 0.91 in (16.0 cm x 7.5 cm x 2.3 cm)
Weight: 8.11 oz (230 g)
Number of programs: 16 MAX
MAX number of pixels: 2048
SD card format: FAT
Supported chips:

LPD6803,D705,1101,6909,6912,LPD8806,LPD8809,TM1803,TM1804,TM1809,
TM1812,M1903,TM1904,TM1909,TM1912,UCS6909,UCS6912,UCS7009,UCS5903,
UCS1903,UCS1909,UCS1912,UCS3903,WS2801,WS2803,WS2811,DS189,TLS3001,DMX512(170/512pixels),
TLS3002,TLS3008,P9813,SM16715,SM16716,BS0901,BS0902,BS0815

NOTE: For the TTL(SPI) signal, the controller ground must be connected to the LED ground directly.

Package List

T-1000S RGB LED Pixel controller
256MB SD Card
LedEdit 2013 software preloaded on the SD Card