Short descriptio
Stepper Motor Driver Controller Pwm Pulse Signal Generator Speed Regulator Module BoardStepper Motor Driver Controller PWM Pulse Signal Generator Speed Regulator Module BoardDescription:- The Stepper Motor Driver Control... Read more...
Stepper Motor Driver Controller Pwm Pulse Signal Generator Speed Regulator Module Board
Stepper Motor Driver Controller PWM Pulse Signal Generator Speed Regulator Module Board
Description:
- The Stepper Motor Driver Controller can generate a PWM signal functions
- The board has a jumper, so it is possible to set the default selection provided in the pulse frequency signal.
- This module is supplied as a stepper drive signal. To control the stepper motor, should have the drive to use.
- The controller has high, medium and low types of frequency signals can be used to select jumper.
- PUL + and PUL- pulsed positive and negative; EN + and EN- is to enable the positive and negative terminals; DIR + and DIR- are the positive and negative directions. These six lines are connected to drive the corresponding pulse, direction, so six ports are possible.
- Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End.
- The forward and reverse of the motor can be controlled by pressing the key.
- The speed of the motor can be controlled by adjusting the frequency of the potentiometer.
Specifications:
- Voltage: 15-160V / 5-12V
- Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ
- Size: 73 x 51 x 37mm
- Weight: 50g
Package Include:
1 x Stepper Motor Driver Controller PWM Pulse Signal Generator
Tags: stepper, motor, driver, controller, pwm, pulse, signal, generator, speed, regulator, module, board-stepper, motor, driver, controller, pwm, pulse, signal, generator, speed, regulator, module, board, arduino