XGecu T48 (TL866-3G) universal USB programmer supports more than 32,000 integrated for SPI/Nor/NAND Flash/EMMC BGA153/162/169/100/221 TSOP/PLCC

XGecu T48 (TL866-3G) universal USB programmer supports more than 32,000 integrated for SPI/Nor/NAND Flash/EMMC BGA153/162/169/100/221 TSOP/PLCC

XGecu T48 supports more than 32000 different integrated and has frequent updates, it is the evolution of the famous TL866 and its  software Xprog  has been updated since 2011 with more and more integrated, it is an essential product in any electronic repair center.

The XGecu T48 programmer has the following advantages:


1-High-speed programming, fast and reliable performance.

2-Low power consumption, small size (10x6x2.5cm), easy to carry.
3-USB port can offer enough power to program all chips so no need external power supply.

4-Supports up to Ic up to 40-pin, surge protection.
5-Supports a wide range of chips, compatible with large capacity of 25 64 MB series chips, compatible with the largest number of PIC microcontrollers.(Upgradeable: Increasing thousands support 40/44/48PIN FLASH, special adapters may be needed)

6-Performs test to series logic integrated circuits 74/54 CMOS4000 . Can be incorrectly placed
7-MCU 32-bit with 120MHZ, 4-layer PCB design, USB2.0 HS 480MHZ.
8-16 ISP channels
9- Total 56-channel dedicated IO
10- 56-channel high-speed high voltage isolation
11-  VDC voltage 1.8-6.5 V 64 adjustable levels, VPP voltage 9V-25V 64 adjustable levels.
12-Chip serial number features the most comprehensive and practical.
13-Compatible  WIN 2000/WIN XP/WIN 2003/WIN 2008/WIN VISTA /WIN7/WIN8 WIN10/windows 11(32BIit/64Bit) operating system
14- Compatible with low voltage 1.8V chips
15- Chip programming 
16- Faster programming than previous versions.
17 Isp connection for 24/93/25 MCU

The software is easy to use, fully functional, super-small code, the execution speed is faster, and can automatically identify the language of the operating system.


Software in English and Chinese. (Downloadable product software includes detailed instructions)

Xprog Software compatibel with all XGecu 

->Software download address:Xprog software 
->Instructions Using the programmer MANUAL USO T48-T58-TL866 ENGLISH
->Instructions Using the programmer French MANUAL USING T48-T58-TL866 French
->Instructions Using the programmer ENGLISH MANUAL USING T48-T58-TL866 ENGLISH

Some features:

★ high programming speed: Built in high performance microcontroller, USB communication speed up to 12 Mbps, with good programming algorithm design, the speed has been consistent with the needs of fast production 0.4Mbits FLASH ROM, this programmer spend (erase, write , compare) the total time of nearly 50 seconds, read and write a 25P80 8Mbits only need 14 seconds (read) + 20 seconds (write) time. Chips of 64MB capacity only need about 120 seconds + 180 seconds. Support Common 8pin 16pin high capacity 25 series chips.


◆ Support a wide range of chip: Various26 27 28 28 29 37 39 49 50series parallel ROM, EPROM, EEPROM, 24 25 35 85 93 95Series Serial EEPROM, 51series microcontroller, AVR microcontroller, including ATMEGA series ATtiny AT90XXX series microcontroller, microchip pic10 PIC12 PIC16 PIC18Series microcontroller, GAL programmable logic device, SRAM test, 54/74 and CMOS4000 series integrated circuits functional tests. Upgrade will increase its support more chips.



★ Low power consumption: The programmer set all usb ultra-fried low power content, does not require external power consumption less than 20mA, although continuous burning time chip does not heat..
★ Super-portable performance: Dimensions10CM * 6cm * 2.5cm


◆ Power: Programming voltage VPP and VCC are independent.


◆ universal 40PIN Pin: All chips no one migration needed or direction placed, unified chip forward, more accustomed to the operation staff.
◆ Update feature: Through the Internet to download software updates.

★ convenient software operations: Software fully conforms to Windows habit operation software series




List Contents:

1- 1 programmer
2- 1 USB cable