Adjustable Magnetic Gauge Car Tool Camber Castor Strut Wheel Alignment

Product Code: 2A080401

Short descriptio


Adjustable Magnetic Gauge Car Tool Camber Castor Strut Wheel AlignmentAdjustable Magnetic Gauge Car Tool Camber Castor Strut Wheel Alignment Description: - This adjustable Magnetic Gauge Tool allows you to retur... Read more...

Found it Cheaper?
15.73€ Ex Tax: 13.00€

  • Availability: Out Of Stock 0

  • 2 or more 14.94€


Adjustable Magnetic Gauge Car Tool Camber Castor Strut Wheel Alignment

Adjustable Magnetic Gauge Car Tool Camber Castor Strut Wheel Alignment

Description:
- This adjustable Magnetic Gauge Tool allows you to return the strut to the original camber position after dismantling and re-assembling the suspension. Also, with this tool you can check the amount of camber change before re-installing. 
- Color: Silver
- Material: steel
- Detect range: 1.5mm
- Detect Accuracy: 99

Specifications:
- It measures the camber and caster angle on the wheel hub or brake disc.
- Adjustable magnetic gauge attaches to the hub or to the disc brake.
- Magnetic gauge has a simple leveling adjustment from -5 degrees to 5 degrees.
- Very easy to read and very convenient to operate.
- It allows adjustment to maintain correct wheel alignment
- You can use this level to restore a vehicle's camber setting after strut installation or repair.

Compatible with:
- VW: Golf, Beetle, Caddy, Passat, Polo, Jetta
- Mercedes-Benz: A / B / C / E / M / S Class, CLA, GLK, CLS
- Audi: A3, A4, A5, A6, A8
- BMW: 1 / 3 / 4 / 5 / 7 Series, X1, X3, X4, X5, X6
- Mazda: 3, 6, CX-5, CX-7
- Hyundai: ix35, Santa Fe, Tucson, Sonata, Elantra
- Honda: Accord, City, For Civic, CR-V, Odyssey
- Chevrolet: Cruze, Malibu, Tahoe, Suburban
- Kia: Optima, Rio, Sportage
- Peugeot: 206, 207, 308, 406, 407
- Ford: Focus, Edge, Fusion, Mustang
- Suzuki: Swift, SX-4
- Toyota: Camry, 4Runner, Corolla, Highlander, Prius, Sienna, Yari

How to use Magnetic Gauge:
1. Remove the four-wheel positioning sensor (fixture) and then remove the tire
2. Carefully suck the magnetic gauge tool on the side of the brake wheel
3. Adjust the gauge tool to zero
4. Installed the required positioning special parts
5. Use special tool, with the help of magnetic gauge tool's degree instruction to adjust the positioning parts to the required measurement angle
6. If there is a little deviation when re-test with the positioning tool, just fine-tune at the bottom of the car. (In general, a little deviation doesn’t cause positioning failure)

Include:
- 1 x Adjustable Magnetic Gauge Tool

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: adjustable, magnetic, gauge, car, tool, camber, castor, strut, wheel, alignment, calibrators