M962 Infrared Ic Heater Reflow Wave Oven

M962 Infrared Ic Heater Reflow Wave Oven

M962 Description:

The M962 is a micro-processor controlled reflow oven. The device is powered by standard 220VAC 50/60HZ (220VAC Model is available). User interface is implemented by way of M962 input keys and an LCD display. Pre-Set heating Modes are selected by user interaction with thermal cycle progress observed on LCD display.
This self-contained reflow station allows safe soldering techniques and the manipulation of SMD、BAG and other small electronic parts mounted on a PCB assembly. The M962 may be used to automatically “re-flow” solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.

A windowed drawer is designed to hold the work-piece. Thermal cycle accuracy is maintained by closed loop micro-computer control with infrared heaters, thermocouple and circulating air.

The M962 is simple to use, the soldering process is completely automatic defined by pre-defined thermal cycles,



FEATURES


The M962 is a self-contained Micro-Processor controlled IC Heater and solder rework station.

Uses up to 800 watts of energy efficient Infrared heating and air circulation to re-flow solder in a large 260×200mm area.

Parameters of 50Soldering cycles

Soldering cycles are keypad selected and progress displayed on the M962 LCD.

A single windowed drawer holds assemblies within the heating chamber,

The M962 design is ergonomic, practical and easily operated.

The entire soldering process is completes automatically from Preheat, Soak and Reflow through cool- down.

The M962 design is ergonomic, practical and easily operated.

The M962 is an economical rework solution from single runs to on-demand small batch production.

Light weight and a small footprint allows the M962 to be easily bench positioned transported or stored.

The M962 can solder most bosseyed or double-face PCB boards’ small parts, ie.: CHIP、SOP、PLCC、QFP、BGA etc; Can be used to the gum of the product solid, turning the circuit board hot aging, maintaining the PCB board and so on. Be satisfied to the needs of ”academe”, “smallorder run” and “extensively development of enterprise & company”

Technical Parameter
Supply Voltage: AC220V /50Hz
Max Power: 800W
Maximum Soldering Area: 200×260 mm
Temperature Range: 100℃-350℃
Cycle Time: 1～8 min


Parts Inventory

m962 Main Assembly x 1
Power Cable 220VAC x 1
5mm Fuse, 10A 250VAC x1
This Manual on CD x1