Konnwei KW510 Car Battery Tester with Test/Repair/Recharge 3in1 Functions

Product Code: 2a130202

Short descriptio


Konnwei KW510 Car Battery Tester with Test/Repair/Recharge 3in1 FunctionsKonnwei KW510 Car Battery Tester with Test/Repair/Recharge 3in1 FunctionsDescription: - Even if the positive and negative poles are connected ... Read more...

Found it Cheaper?
37.51€ Ex Tax: 31.00€

  • Availability: In Stock 4


Konnwei KW510 Car Battery Tester with Test/Repair/Recharge 3in1 Functions

Konnwei KW510 Car Battery Tester with Test/Repair/Recharge 3in1 Functions


Description: 

- Even if the positive and negative poles are connected reversely, there will be reverse protection and will not damage the battery.

- It provides unique indication of battery conditions. Beside this analyser also provides check the alternator's charging and starter's cranking conditions.

- It is able to test condition of discharged battery, consistent and repeatable results.

- It never discharges or drain the battery.

- Maintenance free and no internal batteries required.

- It powers up when connected to the battery posts during testing.


Application:

- For all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, EFB and Gel battery, etc.


Battery charger specification:

AC input: 100-240V/50-60Hz 

Output: Voltage 12V 

Output: Current 5A 

Output Volt No Load: 13.8V 

Minimum Start Volt: >2.0V 

Input Power with Load: Max 80W 

Input Power No Load: 3W 

Cooling: Fan 

Charging Capacity Range :4AH-100AH 

Temperature Compensation: Yes, Winter & Summer Mode 

Compatible Battery Type: All types of Lead-acid batteries


Languages:

English, German, French, Dutch, Russian, Spanish, Italian ,Portuguese


Functions:

Battery Test:

- Test batteries to IN/OUT of the vehicle accurate results in milliseconds, analysis result with Good or Replace.

- Large and easy-to-read test results based on CA,CCA,BCI,MCA,JIS,SAE,EN,DIN and IECS Standards.

- Vehicle cranking system test, cranking time, voltage and status.

- Vehicle charging system test load voltage, unloaded voltage, ripple status and charging system status.


Battery recharge:

- 12V 4Ah-100Ah car battery can be charged full power within 12 hours . 


Battery Repair :

- Restore the capacity of the battery by repairing the car battery, extend the service life of the battery and improve the performance of the battery.

Write a review

Note: HTML is not translated!

Tags: Konnwei, KW510, Car, Battery, Tester, with, Test/Repair/Recharge, 3in1, Functions konnwei, kw510, car, battery, tester, test/repair/recharge, functions, tools