Wireless Remote Control Switch 220v

Wireless Remote Control Switch 220v

Wireless Remote Control Switch 220V

Description:

- This AC22OV mini receiver is perfect and compact because of its mini size. It is very unusual for the AC receiver plate to be so small. 

- Despite its small size, its performance is equivalent to the receiver plate of larger common capacitors. 

- It uses a different film cover that is safer than the common capacitors. (After the external power supply is disconnected, the charging power will be maintained for a long time, if you touch it you will get an electric shock, but the film cover will not have this kind of problem. Even though the film cover is not valid, it will not cause electric shock and will not endanger personal safety).

Specifications:

- Voltage: AC220V (input AC220V output AC220V)

- Maximum current: 10a relay

- Channel: 1 channel

- Frequency: 315MHZ/433.92 MHZ optional

- Receiver sensitivity: -105Db

- Operating temperature: -10 °C + 60 °C

- Exit form: momentary. Adjustable closure

- Code type: Learn code (add controller by the learn button on the receiver)

Output status:

Momentary, alternating, freely adjustable by welding with different points.

A: Momentary - No momentary connection.

B: alternating - connecting "T & Mid Dot" is alternating.

C: connected - connect "L & Mid Dot" is tied.

1) Momentary - Press the transmitter button, the receiver relay is on, the release button; The receiver relay is off,

2) Toggle: press transmitter button for 1 time, receiver relay is on, press button again, receiver relay is off,

3) Close: press transmitter button A, the receiver relay is on, press transmitter button B, the relay is off.

AC220V input for the receiver: 

- Press and hold the learn button on the receiver until the LED lights up and then flashes, until it flashes 8 times. It means that the code has been deleted correctly.

Closed:

- AC220V input for the receiver. Press the learning button on the receiver, LED indicator on and slow flash. Then press the button on the transmitter. The LED indicator flashes quickly and the flash returns to slow. Press the button at this time, then the LED indicator blinks fast and off, means that the closed mode learning is completed