Digital Thermostat 220v Stc-1000 Cold And Heat Incubators Aquarium With Teemperature Probe

Digital Thermostat 220v Stc-1000 Cold And Heat Incubators Aquarium With Teemperature Probe

Thermostat temperature controller has two outputs for cold and heat. It is therefore ideal for use in incubators, hatcheries, terrariums, aquariums, indoor plants or any application requiring temperature control.

It has decimals on the LCD screen as well as programming, which helps us to make a maximum adjustment of the temperature needs that we have.

Its programming is very simple, we only have to set an average temperature in parameter F1 and add a hysteresis in parameter F2.

With this thermostat we will achieve an ideal control by providing cold or ventilation or in its absence heat from a heat source such as a light bulb or a resistance.
This is achieved because it has 2 outputs one that are activated depending on whether you need to subit or lower the temperature and that controlled the devices we connect to output diachas.
The maximum power output of the internal relay is 240W, so to control devices with a higher power consumption it is necessary to use solid state relays with more power like the 40A Fotek SSR-40 (also sold separately), so we can control almost any device regardless of power.

Control temperature by setting the temperature setting value and the difference value
Temperature calibration; Refrigerating control output delay protection
Alarm when temperature exceeds temperature limit or when sensor error
Temperature measuring range: -50~99°C
Accuracy: ±1oC (-50~70oC)
Resolution: 0.1oC
Sensor error delay: 1 minute
Power supply: 110V-220VAC±10%, 50/60Hz
Power consumption: ≤3W
Mbient temperature: 0~60oC
Storage temperature: -30~75oC
Relative humidity: 20%~85% (No condensate)
Sensor: NTC sensor (1PC)
Relay contact capacity: Cool 10A/250VAC; Heat 10A/250VAC
Mounting size:71*29mm
Measure range: -50~+99°C
Auto switch between refrigerating and heating
Retrun difference value
Voltage: 220VAC±10%
Front panel size: 75 × 34.5mm (L x W)
Mounting size: 71 × 29mm (L x W)
Product size: 75 × 34.5 ×85mm (L x W x D)
Sensor length: 2m (include the probe)


Note ：
Max voltage: 220V
Max electric Current: 5A
Max total Wattage: 300w.Or it will be overloaded and then burn out.

Package

1 x Temperature Controller
1 x Instruction Manual
1 x Temperature Sensor Probe Cable