Short descriptio
Mastech Ms8910 Smd Rc Resistance Capacitance Meter Tester Auto ScanThe Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD （Surface Mounting Device), there are Chi... Read more...
- Availability: In Stock 4
- 2 or more 24,39€
- 10 or more 23,63€
- 20 or more 21,09€
Mastech Ms8910 Smd Rc Resistance Capacitance Meter Tester Auto Scan
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD （Surface Mounting Device), there are Chip type resistor, Chip type capacitor and diode, for example. Moreover, the Tester have the continuity checking function
The Tester is automatically identified the passive Component as has been indicated above. Therefore, the measurement are allowed by fully automatic detection.
The entire outer surface of the Tester case has been with thermo plastic elastomer, and the two testing pins has been gold-plated, so that it is reduce pin contact resistance and prevent to get rusty.
Features:
3000 counts LCD display
Full automatic measurement
Auto scanning the Resistance/Capacitance/Diode
Function selection by one “FUNC” Push Button
Data Hold function
Continuity Checking function
Over Load Indication ( ‘OL’)
Low Battery Indication
Power Supply: 3V Lithium Battery CR2032 (included)
Auto Power OFF. If the Tester is idle for more than 10 minutes, the tester will automatically turn off the power .
Operating temperature & Humidity: 0 ~ 40℃(32 ~104 ℉) & < 80% RH
Storage temperature & Humidity: -10 ~ 50℃ (14 ~ 122 ℉) & <70%RH
Safety Class: IEC61010-1, 50V CAT III
EMC： According to CE regulation 89/336.
Dimension (L x W x H) & Weight: 170 x 31 x 17mm, Approx. 48.6 g
| Resistance | ||
| Range (Ω) | Resolution (Ω) | Accuracy |
| 300 | 0.1 | ±(1.0% of rdg + 2 digits) |
| 3K | 1 | |
| 30K | 10 | |
| 300K | 100 | |
| 3M | 1K | |
| 30M | 10K | ±(1.2% of rdg + 3 digits) |
| Capacitance | ||
| Range (F) | Resolution (F) | Accuracy |
| 3n | 1p | ±(2.5% of rdg + 3 digits) |
| 30n | 10p | |
| 300n | 100p | |
| 3µ | 1n | |
| 30µ | 10n | |
| 300µ | 100n | ±(3.0% of rdg + 3 digits) |
| 3m | 1µ | |
| 30m | 10µ | |
| Continuity | The buzzer will sound if the resistance is less than 30 ohms | |
| Diode Check | Testing current: 2mA | Open Circuit voltage: 2.8 V |
Accessories:
1) Two free replace test pins.
2) Plastic carrying case.
Tags: mastech, ms8910, smd, resistance, capacitance, meter, tester, auto, scan, multimeters