Holdpeak Hp-90f Digital Network Multimeter Meter With Telephone Line And Network Cable Test Digital

Holdpeak Hp-90f Digital Network Multimeter Meter With Telephone Line And Network Cable Test Digital

Multimeter with LAN Cable Tester RJ11 RJ45

Multimeter with automatic display backlight, voltage, current, resistance, battery test, diode / continuity test, cable test RJ11 / RJ45



To read the measurement in dark places, the green display backlight turns on automatically.

During the battery test, the voltage is measured with low input resistance and displayed (see Technical data in detail - battery test).

When testing telephone cables RJ11 function is checked and displayed accordingly. The test network cables RJ45 is extensive, here is checked for short circuit, reversal and break.

Display: LCD to 1999, digit height approx 16mm, with automatic lighting
A measurement value hold function
Automatic zeroing
Automatic polarity indication
Display if the measured value is out of range
Indicator for low power
Battery saver: automatic shutdown with previous beep
Safety: Complies with EN61010-1, Overvoltage Category III 1000V, Pollution Degree 2
measurement capabilities
DC: 200mV, 2V, 20V, 200V, 1000V
AC: 2V, 20V, 200V, 750V, frequency range 40Hz-400Hz
DC: 200μA, 2mA, 20mA, 200mA, 10A
AC: 2mA, 20mA, 200mA, 10A
Resistance: 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ, 200MΩ
Transistor hFE test
Diode Test
Continuity Test acoustically
Battery test 1.5V, 6V, 9V
Cable Test RJ45 and RJ11
Technical specifications
Product: DMM HP 90F
Power supply: 9V battery
Operating environment: 0-40 ° C, relative humidity ≤85% RH
Storage environment: -10-50 ° C, relative humidity ≤85% RH
Accuracy surroundings: 18-28 ° C, relative humidity ≤70% RH
Dimensions (WxHxL): 88 x 51 x 180mm with rubber protection
Weight: about 390g with rubber protection and battery
The two, indicated in the following table in the measurement uncertainty column values ​​are as ± (% of the total indicator reading + fixed deviation) to understand.