Hp-90epc Holdpeak Rms Auto Ranging Digital Multimeter With Battery Test/Min Max Value

Hp-90epc Holdpeak Rms Auto Ranging Digital Multimeter With Battery Test/Min Max Value

HP-90EPC HoldPeak RMS Auto Ranging Digital Multimeter with Battery Test/Min Max Value

About the USB interface all measuring functions and measuring ranges of the measuring device can be further processed by computer. The included software for Windows emulates an RS232 port via the USB bus.

To read the measurement in dark places, the green display backlight can be switched on for approximately 10 seconds.

Functions:

Display: LCD to 3999, digit height 20mm, with green illumination (about 10s)
A measurement value hold function
Automatic zeroing
Automatic polarity indication
Display if the measured value is out of range
Indicator for low power
Battery saver: automatic shutdown with previous beep
Safety: Complies with EN61010-1, over voltage category III, 600V, CAT II, ​​1000V, Pollution Degree 2
USB adapter for connection to a PC running Windows

Measurement capabilities:

DC: 400mV, 4V, 40V, 400V, 1000V
AC: 4V, 40V, 400V, 750V, frequency range 40Hz-400Hz
DC: 400μA, 4mA, 40mA, 400mA, 4A, 20A
AC: 400μA, 4mA, 40mA, 400mA, 4A, 20A
Resistance: 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ
Capacity: 51,2nF, 512nF, 5,12μF, 51,2μF 100uF
Frequency: 5,12Hz, 51,2Hz, 512Hz, 5,12kHz, 51.2kHz, 512kHz, 5,12Mhz
Duty cycle of 0.1 to 99.9%
Diode Test
Continuity Test acoustically
Battery test 1.5V to 12V.
Temperature: -20 to 1000 ° C (to 250 ° C with supplied sensor)

Technical specifications:

Product: DMM HP 90EPC
Power supply: 9V battery
Operating environment: 0-40 ° C, relative humidity ≤85% RH
Storage environment: -10-50 ° C, relative humidity ≤85% RH
Accuracy surroundings: 18-28 ° C, relative humidity ≤70% RH, ≤2000
Dimensions (WxHxL): 88 x 40 x 205mm with Holster
Weight: about 320g with rubber protection and battery